downloads sit in queue at 99% (fixed... ?)

[nobrumski]

I already downgraded to 1.00 and did a queue repair, but I can verify I do not have QuickCheck turned on.

When I downgraded, nothing would work until I forced a queue repair. I tried force and repair and nothing changed. Just to try and answer some of the earlier questions.

[Reddwaldd]

We think it is a problem when QuickCheck is turned off and Download all par2 is turned on.

Enable QuickCheck and do a Queue-repair to finish the stalled jobs.

Going to work on a real fix now!

To follow-up on safihre's post.

Here are my settings in /config/switches/

Enable QuickCheck : DISABLED
Download all par2 files : ENABLED
Post-Process Only Verified Jobs : DISABLED

I will do your tests this weekend (the ones you asked me in PM).

Best Regards,

[Timberwolf99]

I think I have quick check on already. Should I toggle the par2 setting to off if it's on.

[safihre]

Indeed the problem is in the Download all par2 function, turning that off might also work on it's own.

[Timberwolf99]

Ok i can confirm that on 1.0.1, just having download a par2 files and enable quick check disabled allowed for the continuation into post processing without intervention from myself.

[Knuspar]

Indeed the problem is in the Download all par2 function, turning that off might also work on it's own.

I think its the download all par2 that bugs as well..

My settings were:


Enable QuickCheck : ENABLED
Download all par2 files : ENABLED
Post-Process Only Verified Jobs : DISABLED

changed it to


Enable QuickCheck : DISABLED
Download all par2 files : DISABLED
Post-Process Only Verified Jobs : DISABLED

And now it works fine.

I had the problem that my downloads went to 100+% so 108% or so .. and never finished.

[shypike]

We know why it happens.
There will be a solution in 1.0.2

[ruscat]

I've got the same problem, just started in the past few days, the queue stalls at 100% with no post processing. I tried making the changes suggested in the previous posts (tuning off quick check and download all par2) but I can't get the queue to start processing the items stalled in the queue. Any thoughts. When do you think 1.0.2 will be released. Sabnzbd 1.0.1 is running on Ubuntu 14.04.

[shypike]

1.0.2 is out. Please let us know whether it helps.
Stalled jobs can be forced to go to post processing by setting the priority to "Stop".

[Reddwaldd]

Hey Shypike,

I am upgrading to 1.0.2 as i write those lines. My queue have about 170 items. I'll let you guys know if the issues are still there.

For reference, I won't change my SAB settings for testing purposes.

Enable QuickCheck : DISABLED
Download all par2 files : ENABLED
Post-Process Only Verified Jobs : DISABLED

Best Regards,

-Rw

[Reddwaldd]

Hello again,

Just a quick update, so far so good !

Four items successfully downloaded/post-processed. If anything, I'll let you guys know here. I will continue to do spot checks until the queue is empty.

Regards,

- Rw

[Timberwolf99]

Just did a test run, problem seems to be fixed. Thankyou guys very much for the fast turn around on this.

[blackkatt]

We think it is a problem when QuickCheck is turned off and Download all par2 is turned on.

Enable QuickCheck, disable Download all par2 and do a Queue-repair to finish the stalled jobs.

Going to work on a real fix now!

Hey, this is still a problem in latest version 1.0.2 (windows) just so you know.

PS: dont know if it was just repaired or not. I woke up and saw a download stuck at 100% complete in queue.

[shypike]

Stuck at 99% is a different problem than stuck at 100%.
The latter we fixed.
The former is much more complicated; so far we haven't been able to reproduce it.
The difference is that, at 99%, there are still articles to be downloaded.
What we've seen so far is that it can be caused by servers timing out on missing articles.

[blackkatt]

I see. I did not get any errors that i saw so not much to go on. I will look at the log next time