Howto: updating in Debian proper

[cyrben]

user@debian:~$ sudo apt-get remove sabnzbdplus
[sudo] password for user:
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package 'sabnzbdplus' is not installed, so not removed
The following packages were automatically installed and are no longer required:
javascript-common libjs-excanvas libjs-mochikit libtidy-0.99-0
python-cheetah python-configobj python-feedparser python-libxml2
python-openssl python-utidylib python-yenc wwwconfig-common
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
user@debian:~$ sudo apt-get install sabnzbdplus
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
sabnzbdplus-theme-classic sabnzbdplus-theme-plush sabnzbdplus-theme-smpl
Suggested packages:
sabnzbdplus-theme-mobile python-notify python-dbus
The following NEW packages will be installed:
sabnzbdplus sabnzbdplus-theme-classic sabnzbdplus-theme-plush
sabnzbdplus-theme-smpl
0 upgraded, 4 newly installed, 0 to remove and 0 not upgraded.
Need to get 1,496 kB of archives.
After this operation, 4,732 kB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 http://ppa.launchpad.net/jcfp/ppa/ubuntu/ precise/main sabnzbdplus-theme-plush all 0.7.18-0ubuntu1~jcfp1~precise [229 kB]
Get:2 http://ppa.launchpad.net/jcfp/ppa/ubuntu/ precise/main sabnzbdplus all 0.7.18-0ubuntu1~jcfp1~precise [1,160 kB]
Get:3 http://ppa.launchpad.net/jcfp/ppa/ubuntu/ precise/main sabnzbdplus-theme-classic all 0.7.18-0ubuntu1~jcfp1~precise [30.7 kB]
Get:4 http://ppa.launchpad.net/jcfp/ppa/ubuntu/ precise/main sabnzbdplus-theme-smpl all 0.7.18-0ubuntu1~jcfp1~precise [75.9 kB]
Fetched 1,496 kB in 0s (2,889 kB/s)
Selecting previously unselected package sabnzbdplus-theme-plush.
(Reading database ... 37131 files and directories currently installed.)
Unpacking sabnzbdplus-theme-plush (from .../sabnzbdplus-theme-plush_0.7.18-0ubuntu1~jcfp1~precise_all.deb) ...
Selecting previously unselected package sabnzbdplus.
Unpacking sabnzbdplus (from .../sabnzbdplus_0.7.18-0ubuntu1~jcfp1~precise_all.deb) ...
Selecting previously unselected package sabnzbdplus-theme-classic.
Unpacking sabnzbdplus-theme-classic (from .../sabnzbdplus-theme-classic_0.7.18-0ubuntu1~jcfp1~precise_all.deb) ...
Selecting previously unselected package sabnzbdplus-theme-smpl.
Unpacking sabnzbdplus-theme-smpl (from .../sabnzbdplus-theme-smpl_0.7.18-0ubuntu1~jcfp1~precise_all.deb) ...
Processing triggers for man-db ...
Setting up sabnzbdplus-theme-plush (0.7.18-0ubuntu1~jcfp1~precise) ...
Setting up sabnzbdplus (0.7.18-0ubuntu1~jcfp1~precise) ...
Installing new version of config file /etc/init.d/sabnzbdplus ...
[ ok ] Starting SABnzbd+ binary newsgrabber:.
Setting up sabnzbdplus-theme-classic (0.7.18-0ubuntu1~jcfp1~precise) ...
Setting up sabnzbdplus-theme-smpl (0.7.18-0ubuntu1~jcfp1~precise) ...
user@debian:~$ sabnzbdplus --version | head -3

sabnzbdplus-0.7.18

t works ! I would be more careful in the future ..
If you were in France , I would have paid you a meal at the restaurant.
Congratulations for your work!

[sander]

Cool!

So where in France is that restaurant?

[cyrben]

Hello.

Paris, the most beautiful city of the world..of course

[fudgi]

Hi, i hope someone can help me with Debian wheezy:

I had already installed sabnzbd 1.0.2 and now wanted to upgrade to 2.0.0 and did everything what the first post said which worked fone, till i did:

>> apt-get -o APT::Install-Recommends=1 install sabnzbdplus
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
Probieren Sie »apt --fix-broken install«, um dies zu korrigieren.
Die folgenden Pakete haben unerfüllte Abhängigkeiten:
libapache2-mod-rpaf : Hängt ab von: apache2-api-20120211
psa-imp : Hängt ab von: psa-horde (>= 5.1.6) ist aber nicht installierbar
psa-ingo : Hängt ab von: psa-horde (>= 5.1.6) ist aber nicht installierbar
psa-kronolith : Hängt ab von: psa-horde (>= 5.1.6) ist aber nicht installierbar
psa-mnemo : Hängt ab von: psa-horde (>= 5.1.6) ist aber nicht installierbar
sabnzbdplus : Beschädigt: sabnzbdplus-theme-classic aber 1.0.2-0ubuntu1~jcfp1~precise soll installiert werden
Beschädigt: sabnzbdplus-theme-glitter aber 1.0.2-0ubuntu1~jcfp1~precise soll installiert werden
Beschädigt: sabnzbdplus-theme-plush aber 0.6.15-1 soll installiert werden
Beschädigt: sabnzbdplus-theme-smpl aber 1.0.2-0ubuntu1~jcfp1~precise soll installiert werden
sabnzbdplus-theme-smpl : Hängt ab von: sabnzbdplus (= 1.0.2-0ubuntu1~jcfp1~precise) aber 2.0.1~rc1-0ubuntu1~jcfp1~precise soll installiert werden
E: Unerfüllte Abhängigkeiten. Versuchen Sie »apt --fix-broken install« ohne Angabe eines Pakets (oder geben Sie eine Lösung an).

as far as i understand psa-horde for example is missing... but it cant be installed... anyone got n idea what i can do?

[sander]

Did you run "apt --fix-broken install" ?

[fudgi]

yes i have, did nothing for me

[jcfp]

You have plenty of other problems, none of which are in any way related to sab:

libapache2-mod-rpaf : Hängt ab von: apache2-api-20120211
psa-imp : Hängt ab von: psa-horde (>= 5.1.6) ist aber nicht installierbar
psa-ingo : Hängt ab von: psa-horde (>= 5.1.6) ist aber nicht installierbar
psa-kronolith : Hängt ab von: psa-horde (>= 5.1.6) ist aber nicht installierbar
psa-mnemo : Hängt ab von: psa-horde (>= 5.1.6) ist aber nicht installierbar

With a previous version of sabnzbdplus already installed (from either standard debian repositories or from the ppa) the apt-get update && apt-get dist-upgrade step takes care of the entire package update. No need for any subsequent apt-get -o APT::Install-Recommends=1 install sabnzbdplus in that situation. I cannot predict what happens when unrelated broken stuff gets in the way though.

[odoll]

As an early bird ;-) I upgraded my Cubietruck arm based Debian Jessie (8. to Stretch (9.0) yesterday.

I usually used the sabnzbdplus_2.1.0-0ubuntu1~jcfp1~precise_all.deb - also in Jessie - to install it via "dpkg -i".

I thought it would be time to skip the manual steps in the future and added the following two lines to sources.list:

• ppa.launchpad.net/jcfp/ppa/ubuntu xenial main
  ppa.launchpad.net/jcfp/ppa/ubuntu xenial main

as I thought this would be the closest LTS match, as of

• 17.04 zesty stretch / sid
  16.10 yakkety stretch / sid
  16.04 xenial stretch / sid
  15.10 wily jessie / sid
  15.04 vivid jessie / sid
  14.10 utopic jessie / sid
  14.04 trusty jessie / sid
  13.10 saucy wheezy / sid
  13.04 raring wheezy / sid
  12.10 quantal wheezy / sid
  12.04 precise wheezy / sid
  11.10 oneiric wheezy / sid
  11.04 natty squeeze / sid
  10.10 maverick squeeze / sid
  10.04 lucid squeeze / sid

After the upgrade everything still works fine, incl. sabnzbd, however I get the following warning / error:

• root@share:~# apt-get update
  [...]
  Hit:4 ppa.launchpad.net/jcfp/ppa/ubuntu xenial InRelease
  [...]
  Reading package lists... Done
  root@share:~# apt-get upgrade
  [...]
  The following packages have been kept back:
  sabnzbdplus
  0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.
  root@share:~# apt-get -s install sabnzbdplus
  [...]
  The following packages have unmet dependencies:
  sabnzbdplus : Depends: libjs-jquery (< 3) but 3.1.1-2 is to be installed
  E: Unable to correct problems, you have held broken packages.

So which package for Ubuntu would work with Stretch?

PS: had the "remove" links to be able to post this!

[sander]

@odoll:

with "trusty" it works for me on Stretch.

Code: Select all

# cat /etc/apt/sources.list
deb http://deb.debian.org/debian stretch main contrib non-free
deb http://deb.debian.org/debian stretch-updates main contrib non-free
deb http://security.debian.org stretch/updates main contrib non-free

deb http://ppa.launchpad.net/jcfp/ppa/ubuntu trusty main

[odoll]

Thx Sander, for me as well (though I find it odd)

Code: Select all

root@share:~# apt-get install sabnzbdplus
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following additional packages will be installed:
  libjs-jquery libjs-jquery-ui
Suggested packages:
  libjs-jquery-ui-docs python-gtk2 python-notify
Recommended packages:
  consolekit libavahi-compat-libdnssd1 python-dbus
The following NEW packages will be installed:
  libjs-jquery libjs-jquery-ui
The following packages will be upgraded:
  sabnzbdplus
1 upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
Need to get 1,655 kB of archives.
After this operation, 2,869 kB of additional disk space will be used.
Do you want to continue? [Y/n]
Get:1 http://ftp.de.debian.org/debian stretch/main armhf libjs-jquery all 3.1.1-2 [154 kB]
Get:2 http://ppa.launchpad.net/jcfp/ppa/ubuntu trusty/main armhf sabnzbdplus all 2.1.0-0ubuntu1~jcfp1~trusty [1,269 kB]
Get:3 http://ftp.de.debian.org/debian stretch/main armhf libjs-jquery-ui all 1.12.1+dfsg-4 [232 kB]
Fetched 1,655 kB in 3s (504 kB/s)
Selecting previously unselected package libjs-jquery.
(Reading database ... 60286 files and directories currently installed.)
Preparing to unpack .../libjs-jquery_3.1.1-2_all.deb ...
Unpacking libjs-jquery (3.1.1-2) ...
Selecting previously unselected package libjs-jquery-ui.
Preparing to unpack .../libjs-jquery-ui_1.12.1+dfsg-4_all.deb ...
Unpacking libjs-jquery-ui (1.12.1+dfsg-4) ...
Preparing to unpack .../sabnzbdplus_2.1.0-0ubuntu1~jcfp1~trusty_all.deb ...
[ ok ] Stopping SABnzbd+ binary newsgrabber:.
Unpacking sabnzbdplus (2.1.0-0ubuntu1~jcfp1~trusty) over (2.1.0-0ubuntu1~jcfp1~precise) ...
Setting up libjs-jquery (3.1.1-2) ...
Processing triggers for mime-support (3.60) ...
Setting up libjs-jquery-ui (1.12.1+dfsg-4) ...
Processing triggers for systemd (232-25) ...
Setting up sabnzbdplus (2.1.0-0ubuntu1~jcfp1~trusty) ...
insserv: script mtab.sh: service mtab already provided!
[ ok ] Starting SABnzbd+ binary newsgrabber:.
Processing triggers for man-db (2.7.6.1-2) ...

[jcfp]

sabnzbdplus : Depends: libjs-jquery (< 3) but 3.1.1-2 is to be installed

That upper limit was put in place to avoid some javascript issues and incompatibilities that have since been fixed. Just uploaded a bunch of updated files to the ppa, xenial should work on stretch now.

Thanks for reporting!

[zoggy]

jcfp, thank you for all your diligence over these years for providing the sab ppa.

[beaudett]

root@raspberrypi:/home/pi# sabnzbdplus --version | head -3
/usr/lib/python2.7/dist-packages/cryptography/hazmat/bindings/__pycache__/_Cryptography_cffi_d62b3d91x972e1c0b.c:2:20: fatal error: Python.h: No su
ch file or directory
#include <Python.h>
^
compilation terminated.

sabnzbdplus-2.3.4

[safihre]

You are missing python-dev package.

[beaudett]

root@raspberrypi:/home/pi# sabnzbdplus --version | head -3
/usr/lib/python2.7/dist-packages/cryptography/hazmat/bindings/__pycache__/_Cryptography_cffi_d62b3d91x972e1c0b.c:187:43: fatal error: CoreFoundatio
n/CoreFoundation.h: No such file or directory
#include <CoreFoundation/CoreFoundation.h>
^
compilation terminated.

sabnzbdplus-2.3.4