Cannot start SABnzbd after power outage

[skube]

I came home today to discover there was a power failure in my apartment.

I was running SABnzbd 0.7 on a macOS 10.11.6. When I restarted my machine, I was greeted with an error and SAB would just not start anymore.

Poking around it seemed the error was something to with SAB not being able to reference some file: `/usr/lib/libobjc.A.dylib`

I gave up and decided time to upgrade anyway, so I downloaded the latest SABnzbd 2.1.0...Trying to start that up, again nothing seemed to happen. I manually checked the existing `sabnzbd.ini` file and it's still there with port 8080 specified.

The only other relevant error I could find in the console was a somewhat unhelpful error:

Code: Select all

 com.apple.xpc.launchd[1]: (org.sabnzbd.team.57312[468]) Service exited with abnormal code: 70

I never had a problem before and I'm at a loss as to what to try next. Any help would be appreciated.

[safihre]

In the location where you found sabnzbd.ini, there should also be a log file. Can you see if there's info in there?

Or run from the console:

/Applications/SABnzbd.app/Content/MacOS/SABnzbd --console -l 2

This will set logging to Debug to hopefully see an error of some kind. Later you should disable Debug logging again.

[skube]

I checked the log and it looks like the culprit was:

Code: Select all

error: No socket could be created -- (('10.0.1.2', 8080): [Errno 49] Can't assign requested address)

I checked my network and sure enough, my IP address had shuffled after the power outage. I modified the `sabnzbd.ini` file to reflect the new IP and started up SAB successfully!

Thanks for your help!

[safihre]

Now go and switch to Glitter skin, 0.7 is veryyy old!

[sander]

I checked the log and it looks like the culprit was:

Code: Select all

error: No socket could be created -- (('10.0.1.2', 8080): [Errno 49] Can't assign requested address)

I checked my network and sure enough, my IP address had shuffled after the power outage. I modified the `sabnzbd.ini` file to reflect the new IP

Better to use 0.0.0.0 in that field.

[skube]

Now go and switch to Glitter skin, 0.7 is veryyy old!

Updated now to 2.2.0

[skube]

Better to use 0.0.0.0 in that field.

If I do that, won't it be impossible to access SAB from other devices on my network?

[safihre]

No, 0.0.0.0 is exactly the setting to make it accessible to devices in the network:
https://sabnzbd.org/wiki/configuration/2.2/general

[skube]

Awesome.
Appreciate the tip!