False .jig files in series

Get help with all aspects of SABnzbd
Forum rules
Help us help you:
  • Are you using the latest stable version of SABnzbd? Downloads page.
  • Tell us what system you run SABnzbd on.
  • Adhere to the forum rules.
  • Do you experience problems during downloading?
    Check your connection in Status and Interface settings window.
    Use Test Server in Config > Servers.
    We will probably ask you to do a test using only basic settings.
  • Do you experience problems during repair or unpacking?
    Enable +Debug logging in the Status and Interface settings window and share the relevant parts of the log here using [ code ] sections.
killerz298
Newbie
Newbie
Posts: 8
Joined: January 19th, 2018, 1:34 pm

Re: False .jig files in series

Post by killerz298 »

So are you saying that the jig files are real files and my servers just can't download them? I'll deactivate my current servers and try another and see what happens.
User avatar
safihre
Administrator
Administrator
Posts: 5523
Joined: April 30th, 2015, 7:35 am
Contact:

Re: False .jig files in series

Post by safihre »

No the jig files are fake, but a dropped connection on one of your servers causes SAB to retry it endlessly (this is the bug I need to fix).
If you like our support, check our special newsserver deal or donate at: https://sabnzbd.org/donate
gnomehole
Newbie
Newbie
Posts: 19
Joined: May 30th, 2011, 9:17 am

Re: False .jig files in series

Post by gnomehole »

Any news on the .jig files? Isn't impacting operation, but a nuisance as it throws an error every time. Would be nice if we could just ignore that file extension.
User avatar
sander
Release Testers
Release Testers
Posts: 9070
Joined: January 22nd, 2008, 2:22 pm

Re: False .jig files in series

Post by sander »

gnomehole wrote: February 10th, 2018, 8:07 pm Any news on the .jig files? Isn't impacting operation, but a nuisance as it throws an error every time.
It throws an error? What error?

I re-dowloaded https://pastebin.com/k9FbAuKF, and no error at all. Just a correct download.
User avatar
OneCD
Hero Member
Hero Member
Posts: 597
Joined: March 4th, 2017, 3:47 pm

Re: False .jig files in series

Post by OneCD »

I've been getting the same thing now for weeks. Here's one that was logged earlier:
2018-02-05 16:59:38,994::WARNING::[nzbstuff:496] File "<HASH>5ab0512.jig" yEnc (1/1) is empty, skipping
Looking at the gzipped NZB downloaded from my indexer, the .jig file is mentioned at the end of the NZB. Here's the tail-end of my sample NZB:
</segments>
</file>
<file poster="2cc68aad19d2985427bcf3040fe6d871 &lt;[email protected]&gt;" date="1490071459" subject="&quot;918c03e61a8be25ea98f818355ab0512.jig&quot; yEnc (1/1)">
<groups>
<group>alt.binaries.boneless</group>
</groups>
<segments>
</segments>
</file><!-- generated by newznab 0.2.3pz -->
</nzb>
Important to note that the actual target files download without issue - SABnzbd just records that message in its log.
Stuff I like: Apache bash cron DD-WRT Debian DNSMasq Entware FireFox GitHub ImageMagick Kate KDE LibreELEC Netrunner NFS NVIDIA OpenVPN Orvibo-S20 pfSense Python Raspberry-Pi RAID SABnzbd Transmission Usenet VirtualBox Watcher3 XFCE
killerz298
Newbie
Newbie
Posts: 8
Joined: January 19th, 2018, 1:34 pm

Re: False .jig files in series

Post by killerz298 »

sander wrote: February 11th, 2018, 2:02 am
gnomehole wrote: February 10th, 2018, 8:07 pm Any news on the .jig files? Isn't impacting operation, but a nuisance as it throws an error every time.
It throws an error? What error?

I re-dowloaded https://pastebin.com/k9FbAuKF, and no error at all. Just a correct download.
I've been getting that error as well. It's better than the unpacking process hanging like it used to do so it is certainly progress.
User avatar
sander
Release Testers
Release Testers
Posts: 9070
Joined: January 22nd, 2008, 2:22 pm

Re: False .jig files in series

Post by sander »

I repeat: what error?
User avatar
safihre
Administrator
Administrator
Posts: 5523
Joined: April 30th, 2015, 7:35 am
Contact:

Re: False .jig files in series

Post by safihre »

@sander: Not all NZB's with the JIG files are the same, some have a nonsense article in them but some are empty just like OneCD shows.
This will give this error when adding the NZB:
https://github.com/sabnzbd/sabnzbd/blob ... ff.py#L496
"File xxx.jig is empty, skipping"
If you like our support, check our special newsserver deal or donate at: https://sabnzbd.org/donate
killerz298
Newbie
Newbie
Posts: 8
Joined: January 19th, 2018, 1:34 pm

Re: False .jig files in series

Post by killerz298 »

safihre wrote: February 11th, 2018, 1:48 pm @sander: Not all NZB's with the JIG files are the same, some have a nonsense article in them but some are empty just like OneCD shows.
This will give this error when adding the NZB:
https://github.com/sabnzbd/sabnzbd/blob ... ff.py#L496
"File xxx.jig is empty, skipping"
Yes... It is a warning, not an error.

Blahblahblah.Jig is empty, skipping.
User avatar
sander
Release Testers
Release Testers
Posts: 9070
Joined: January 22nd, 2008, 2:22 pm

Re: False .jig files in series

Post by sander »

killerz298 wrote: February 11th, 2018, 2:02 pm
Yes... It is a warning, not an error.

Blahblahblah.Jig is empty, skipping.
Oh, I see. And that Warning appears in the GUI.

For the people running from source: I guess you can change

Code: Select all

sabnzbd/nzbstuff.py:496:                logging.warning(T('File %s is empty, skipping'), self.filename)
to

Code: Select all

sabnzbd/nzbstuff.py:496:                logging.info(T('File %s is empty, skipping'), self.filename)
to get rid of the Warning
killerz298
Newbie
Newbie
Posts: 8
Joined: January 19th, 2018, 1:34 pm

Re: False .jig files in series

Post by killerz298 »

sander wrote: February 11th, 2018, 2:22 pm
killerz298 wrote: February 11th, 2018, 2:02 pm
Yes... It is a warning, not an error.

Blahblahblah.Jig is empty, skipping.
Oh, I see. And that Warning appears in the GUI.

For the people running from source: I guess you can change

Code: Select all

sabnzbd/nzbstuff.py:496:                logging.warning(T('File %s is empty, skipping'), self.filename)
to

Code: Select all

sabnzbd/nzbstuff.py:496:                logging.info(T('File %s is empty, skipping'), self.filename)
to get rid of the Warning
Yes, it shows in the gui and windows notification bar.
AtariBaby
Jr. Member
Jr. Member
Posts: 75
Joined: November 25th, 2011, 5:10 pm

Re: False .jig files in series

Post by AtariBaby »

Changing a line of code might be above my pay grade. Will it be fixed in a future update?
I seem to be getting this each download now, or close to it.
User avatar
safihre
Administrator
Administrator
Posts: 5523
Joined: April 30th, 2015, 7:35 am
Contact:

Re: False .jig files in series

Post by safihre »

I don't want to change this really. There should be a warning when an invalid NZB (empty file) is provided. This way the user knows something is wrong.
It's a bit annoying that indexers now use this as some kind of tactic.
If you like our support, check our special newsserver deal or donate at: https://sabnzbd.org/donate
User avatar
shypike
Administrator
Administrator
Posts: 19774
Joined: January 18th, 2008, 12:49 pm

Re: False .jig files in series

Post by shypike »

I'll add an option to Config->Special.
AtariBaby
Jr. Member
Jr. Member
Posts: 75
Joined: November 25th, 2011, 5:10 pm

Re: False .jig files in series

Post by AtariBaby »

Hi shypike, safihre, followup question: Is this something we should be complaining about to our nzb indexers? Because i donate to them as well, and if it's something lame they are doing, I want to complain. Or maybe I misunderstood your explanation.
Post Reply