hi
I used this link to get it installed
http://sabnzbd.wikidot.com/quick-setup
it is installed on a debian server with no graphicall interface.
I noticed it was installed in the root folder and could only be run as root. I moved te folder to my home folder but it won't run as the regular user. Then I deleted the sabnzbd folder and reinstalled, even found a link for 0.4.6 and used that.
Got the tar xf SABnzbd-0.4.5-src.tar
file into my homedirectory but it won't work as normal user only as root.
anyone can help me to install it in the home folder of a normal user and be able to run it as user not root ?
thanks
I have been installing and deleting the folder and hope I didn't mess it up too bad
Debian install doesn't work wont run as normal user
Forum rules
Help us help you:
Help us help you:
- Are you using the latest stable version of SABnzbd? Downloads page.
- Tell us what system you run SABnzbd on.
- Adhere to the forum rules.
- Do you experience problems during downloading?
Check your connection in Status and Interface settings window.
Use Test Server in Config > Servers.
We will probably ask you to do a test using only basic settings. - Do you experience problems during repair or unpacking?
Enable +Debug logging in the Status and Interface settings window and share the relevant parts of the log here using [ code ] sections.
Re: Debian install doesn't work wont run as normal user
It would help if you would post all commands and output and interaction here.
The instruction on http://sabnzbd.wikidot.com/quick-setup#toc1 should work. Important: run as normal user in your home directory.
The instruction on http://sabnzbd.wikidot.com/quick-setup#toc1 should work. Important: run as normal user in your home directory.
If you like our support, check our special newsserver deal or donate at: https://sabnzbd.org/donate
Re: Debian install doesn't work wont run as normal user
Possibly SABnzbd cannot detect your home folder.
You can help it by using the -f option:
The default location for sabnzbd.ini is ~/.sabnzbd,
but you are free to put it anywhere else (where you have write permission).
You can help it by using the -f option:
Code: Select all
./SABnzbd.py -f /MY_PATH/sabnzbd.inibut you are free to put it anywhere else (where you have write permission).
Last edited by shypike on February 27th, 2009, 6:24 am, edited 1 time in total.
Re: Debian install doesn't work wont run as normal user
OK
thanks for the help, I deleted all files I could find from sabnzdb, and went trough the steps again.
It al worked ok, have the version 0.4.6 now. I started the program from the SABnzbd folder with python SABnzbd.py
and I get in my textscreen the page from SABnzdb.
Thereafter I restarted the server to start clean and added the option -b 0 so it wouldn't start a local webbrowser.
then it shows in my terminal screen this line as last
27/Feb/2009:14:11:51 HTTP INFO Serving HTTP on http://localhost:8080/
But when I type in my webbrowser http://192.168.1.200:8080/ I get the message that the browser can't make a connection
also when I type http://192.168.1.200:8080/sabnzbd/ I get this message
Any solutions ??
Something else I noticed, I'm trying all this by ssh-ing into my debian computer and then in the console work via my macbook.
Now just I'm sitting behind a ubuntu pc, going into the SABnzbd-0.4.6 folder and trying to start SABnzdb with the same command as before: python SABnzbd.py -b 0 and I now get an error :
Error:
Can't write to logfile.
a minute later I tried via the macbook and there it starts ?? (but still nothing via the webbrowser)
thanks for the help, I deleted all files I could find from sabnzdb, and went trough the steps again.
It al worked ok, have the version 0.4.6 now. I started the program from the SABnzbd folder with python SABnzbd.py
and I get in my textscreen the page from SABnzdb.
Thereafter I restarted the server to start clean and added the option -b 0 so it wouldn't start a local webbrowser.
then it shows in my terminal screen this line as last
27/Feb/2009:14:11:51 HTTP INFO Serving HTTP on http://localhost:8080/
But when I type in my webbrowser http://192.168.1.200:8080/ I get the message that the browser can't make a connection
also when I type http://192.168.1.200:8080/sabnzbd/ I get this message
Any solutions ??
Something else I noticed, I'm trying all this by ssh-ing into my debian computer and then in the console work via my macbook.
Now just I'm sitting behind a ubuntu pc, going into the SABnzbd-0.4.6 folder and trying to start SABnzdb with the same command as before: python SABnzbd.py -b 0 and I now get an error :
Error:
Can't write to logfile.
a minute later I tried via the macbook and there it starts ?? (but still nothing via the webbrowser)
Last edited by jp73 on February 27th, 2009, 8:56 am, edited 1 time in total.
Re: Debian install doesn't work wont run as normal user
Yes: read http://sabnzbd.wikidot.com/configure-general , first paragraph "Host".jp73 wrote:
But when I type in my webbrowser http://192.168.1.200:8080/ I get the message that the browser can't make a connection
also when I type http://192.168.1.200:8080/sabnzbd/ I get this message
Any solutions ??
If you like our support, check our special newsserver deal or donate at: https://sabnzbd.org/donate
Re: Debian install doesn't work wont run as normal user
You got me puzzled for quite a while until I read what I posted before and loked at the messagesander wrote:Yes: read http://sabnzbd.wikidot.com/configure-general , first paragraph "Host".jp73 wrote:
But when I type in my webbrowser http://192.168.1.200:8080/ I get the message that the browser can't make a connection
also when I type http://192.168.1.200:8080/sabnzbd/ I get this message
Any solutions ??
so starting with : python SABnzbd.py -b 0 -s 192.168.1.200:8080
did the trick and I got it now in the webbrowser
thanks a lot , now I have to figure out how to get SABnzb running in the background and starting up and shutting down when I boot the server ..... any hints for this ?
Re: Debian install doesn't work wont run as normal user
How about reading the Wiki:jp73 wrote: thanks a lot , now I have to figure out how to get SABnzb running in the background and starting up and shutting down when I boot the server ..... any hints for this ?
http://sabnzbd.wikidot.com/install-as-a-unix-daemon
Re: Debian install doesn't work wont run as normal user
Hi
yes I've seen this page, problem is that I don't exactly know what to do with it.... I can copy past it into nano and change this: replace sabuser with the proper user account and HOSTADDRESS:PORT by the proper address and port.
But then where to put it and how ? As a text file ?
I'll continue to google for info about scripts but it's not really clear to me
So I've adapted the file, just don't know what to do with /usr/bin/wget and /usr/bin/sudo
do I have to change this path also ?
below is what I have now, SABnzbd is in the following folder : /home/jeroen/SABnzbd-0.4.6
if i type whoami I get jeroenpeters
so is below correct ?
#!/bin/sh
case "$1" in
start)
echo "Starting SABnzbd."
/usr/bin/sudo -u jeroenpeters -H /usr/local/src/SABnzbd/SABnzbd.py -d -f /home/jeroenpeters/.sabnzbd/sabnzbd.ini
;;
stop)
echo "Shutting down SABnzbd."
/usr/bin/wget -q --delete-after "http://192.168.1.200:8080/sabnzbd/api?mode=shutdown"
;;
*)
echo "Usage: $0 {start|stop}"
exit 1
esac
exit 0
yes I've seen this page, problem is that I don't exactly know what to do with it.... I can copy past it into nano and change this: replace sabuser with the proper user account and HOSTADDRESS:PORT by the proper address and port.
But then where to put it and how ? As a text file ?
I'll continue to google for info about scripts but it's not really clear to me
So I've adapted the file, just don't know what to do with /usr/bin/wget and /usr/bin/sudo
do I have to change this path also ?
below is what I have now, SABnzbd is in the following folder : /home/jeroen/SABnzbd-0.4.6
if i type whoami I get jeroenpeters
so is below correct ?
#!/bin/sh
case "$1" in
start)
echo "Starting SABnzbd."
/usr/bin/sudo -u jeroenpeters -H /usr/local/src/SABnzbd/SABnzbd.py -d -f /home/jeroenpeters/.sabnzbd/sabnzbd.ini
;;
stop)
echo "Shutting down SABnzbd."
/usr/bin/wget -q --delete-after "http://192.168.1.200:8080/sabnzbd/api?mode=shutdown"
;;
*)
echo "Usage: $0 {start|stop}"
exit 1
esac
exit 0
Last edited by jp73 on February 27th, 2009, 2:51 pm, edited 1 time in total.
Re: Debian install doesn't work wont run as normal user
OK
Ive put the script in /etc/init.d/SABnzbd
then I ran chmod 755 /etc/init.d/SABnzbd
then I ran update-rc.d SABnzbd defaults
But it doesn't work and I'm stuck here, I really need some help with this......
below the contens of the script, I don't know if its modified alright....
#!/bin/sh
case "$1" in
start)
echo "Starting SABnzbd."
/usr/bin/sudo -u jeroenpeters -H /home/jeroen/SABnzbd/SABnzbd.py -d -f
/home/jeroen/.sabnzbd/sabnzbd.ini
;;
stop)
echo "Shutting down SABnzbd."
/usr/bin/wget -q --delete-after "http://192.168.1.200:8080/sabnzbd/api?mode=shutdown"
;;
*)
echo "Usage: $0 {start|stop}"
exit 1
esac
exit 0
thanks
- If I run /etc/init.d/SABnzbd start
I get
Starting SABnzbd.
sudo: /home/jeroen/SABnzbd/SABnzbd.py: command not found
/etc/init.d/SABnzbd: line 7: /home/jeroen/.sabnzbd/sabnzbd.ini: Toegang geweigerd
(Toegang geweigerd means access denied)
Any idea ??
Ive put the script in /etc/init.d/SABnzbd
then I ran chmod 755 /etc/init.d/SABnzbd
then I ran update-rc.d SABnzbd defaults
But it doesn't work and I'm stuck here, I really need some help with this......
below the contens of the script, I don't know if its modified alright....
#!/bin/sh
case "$1" in
start)
echo "Starting SABnzbd."
/usr/bin/sudo -u jeroenpeters -H /home/jeroen/SABnzbd/SABnzbd.py -d -f
/home/jeroen/.sabnzbd/sabnzbd.ini
;;
stop)
echo "Shutting down SABnzbd."
/usr/bin/wget -q --delete-after "http://192.168.1.200:8080/sabnzbd/api?mode=shutdown"
;;
*)
echo "Usage: $0 {start|stop}"
exit 1
esac
exit 0
thanks
- If I run /etc/init.d/SABnzbd start
I get
Starting SABnzbd.
sudo: /home/jeroen/SABnzbd/SABnzbd.py: command not found
/etc/init.d/SABnzbd: line 7: /home/jeroen/.sabnzbd/sabnzbd.ini: Toegang geweigerd
(Toegang geweigerd means access denied)
Any idea ??
Last edited by jp73 on February 28th, 2009, 3:18 am, edited 1 time in total.
Re: Debian install doesn't work wont run as normal user
Yes, I think the path "/home/jeroen/SABnzbd/SABnzbd.py" is wrong.jp73 wrote: sudo: /home/jeroen/SABnzbd/SABnzbd.py: command not found
Where did you install SABnzbd?
Re: Debian install doesn't work wont run as normal user
/home/jeroen/SABnzbd-0.4.6
these files are in here :
. COPYRIGHT.txt interfaces PKG-INFO Sample-PostProc.cmd
.. GPL2.txt ISSUES.txt README.txt Sample-PostProc.sh
CHANGELOG.txt GPL3.txt licenses sabnzbd
cherrypy INSTALL.txt LICENSE.txt SABnzbd.py
I see , I changed /home/jeroen/SABnzbd/SABnzbd.py to /home/jeroen/SABnzbd-0.4.6/SABnzbd.py
by running /etc/init.d/SABnzbd start
I get :
Usage: SABnzbd.py [-f ]
Options marked [*] are stored in the config file
Options:
-f --config-file Location of config file
-s --server Listen on server:port [*]
-t --templates Template directory [*]
-2 --template2 Secondary template dir [*]
-l --logging Set logging level (0= least, 2= most) [*]
-w --weblogging Set cherrypy logging (0= off, 1= on) [*]
-b --browser Auto browser launch (0= off, 1= on) [*]
-d --daemon Fork daemon process
--permissions Set the chmod mode (e.g. o=rwx,g=rwx) [*]
--force Discard web-port timeout (see Wiki!)
-h --help Print this message
-v --version Print version information
-c --clean Remove queue, cache and logs
-p --pause Start in paused mode
/etc/init.d/SABnzbd: line 7: /home/jeroen/.sabnzbd/sabnzbd.ini: Toegang geweigerd
(Toegang geweigerd means access denied)
these files are in here :
. COPYRIGHT.txt interfaces PKG-INFO Sample-PostProc.cmd
.. GPL2.txt ISSUES.txt README.txt Sample-PostProc.sh
CHANGELOG.txt GPL3.txt licenses sabnzbd
cherrypy INSTALL.txt LICENSE.txt SABnzbd.py
I see , I changed /home/jeroen/SABnzbd/SABnzbd.py to /home/jeroen/SABnzbd-0.4.6/SABnzbd.py
by running /etc/init.d/SABnzbd start
I get :
Usage: SABnzbd.py [-f ]
Options marked [*] are stored in the config file
Options:
-f --config-file Location of config file
-s --server Listen on server:port [*]
-t --templates Template directory [*]
-2 --template2 Secondary template dir [*]
-l --logging Set logging level (0= least, 2= most) [*]
-w --weblogging Set cherrypy logging (0= off, 1= on) [*]
-b --browser Auto browser launch (0= off, 1= on) [*]
-d --daemon Fork daemon process
--permissions Set the chmod mode (e.g. o=rwx,g=rwx) [*]
--force Discard web-port timeout (see Wiki!)
-h --help Print this message
-v --version Print version information
-c --clean Remove queue, cache and logs
-p --pause Start in paused mode
/etc/init.d/SABnzbd: line 7: /home/jeroen/.sabnzbd/sabnzbd.ini: Toegang geweigerd
(Toegang geweigerd means access denied)
Last edited by jp73 on February 28th, 2009, 4:03 am, edited 1 time in total.
Re: Debian install doesn't work wont run as normal user
This is basic Linux stuff. Think "root" versus normal user ... look at the file /home/jeroen/.sabnzbd/sabnzbd.ini (tip: "ls -al /home/jeroen/.sabnzbd/sabnzbd.ini"). And reread the beginning of this thread ...jp73 wrote:
/etc/init.d/SABnzbd: line 7: /home/jeroen/.sabnzbd/sabnzbd.ini: Toegang geweigerd
(Toegang geweigerd means access denied)
If you like our support, check our special newsserver deal or donate at: https://sabnzbd.org/donate
Re: Debian install doesn't work wont run as normal user
The folder /home/jeroen/.sabnzbd does not exist.
You must create it first:
You must create it first:
Code: Select all
mkdir /home/jeroen/.sabnzbd
Re: Debian install doesn't work wont run as normal user
Hi
it exists
these file are in /home/jeroen/
drwxrwxrwx 8 jeroenpeters users 4096 feb 27 14:06 .
drwxr-xr-x 6 root root 4096 feb 26 09:42 ..
-rwxrwxrwx 1 jeroen jeroen 5840 feb 28 09:43 .bash_history
-rwxrwxrwx 1 jeroenpeters users 220 feb 22 14:17 .bash_logout
-rwxrwxrwx 1 jeroenpeters users 3116 feb 22 14:17 .bashrc
drwxr-xr-x 4 jeroenpeters users 4096 feb 27 14:06 downloads
drwxrwxrwx 2 jeroenpeters users 4096 feb 23 07:38 .mc
-rwxrwxrwx 1 jeroenpeters users 675 feb 22 14:17 .profile
-rwxrwxrwx 1 root root 3691 feb 24 22:59 .rtorrent.rc
drwxr-xr-x 4 jeroenpeters users 4096 feb 27 14:06 .sabnzbd
drwxr-xr-x 6 jeroenpeters users 4096 feb 27 14:04 SABnzbd-0.4.6
-rwxr-xr-x 1 jeroenpeters users 2959360 dec 11 23:30 SABnzbd-0.4.6-src.tar
drwxrwxrwx 2 jeroenpeters users 4096 feb 22 16:49 .ssh
drwx------ 2 root root 4096 feb 26 14:42 .w3m
jeroenpeters@BP6:~$
And I changed the folder ls -al /home/jeroen/.sabnzbd/sabnzbd.ini
-rwxr-xr-x 1 jeroenpeters users 1974 feb 28 08:11 /home/jeroen/.sabnzbd/sabnzbd.ini
so that this folder kan be written to.
if now I etc/init.d/SABnzbd start
I get all this...........
et
jeroenpeters@BP6:~$ /etc/init.d/SABnzbd start
Starting SABnzbd.
Usage: SABnzbd.py [-f ]
Options marked [*] are stored in the config file
Options:
-f --config-file Location of config file
-s --server Listen on server:port [*]
-t --templates Template directory [*]
-2 --template2 Secondary template dir [*]
-l --logging Set logging level (0= least, 2= most) [*]
-w --weblogging Set cherrypy logging (0= off, 1= on) [*]
-b --browser Auto browser launch (0= off, 1= on) [*]
-d --daemon Fork daemon process
--permissions Set the chmod mode (e.g. o=rwx,g=rwx) [*]
--force Discard web-port timeout (see Wiki!)
-h --help Print this message
-v --version Print version information
-c --clean Remove queue, cache and logs
-p --pause Start in paused mode
/home/jeroen/.sabnzbd/sabnzbd.ini: line 1: __version__: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 2: [misc]: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 3: log_dir: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 4: auto_browser: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 5: permissions: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 6: check_new_rel: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 7: replace_spaces: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 8: replace_illegal: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 9: fail_on_crc: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 10: enable_filejoin: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 11: enable_unzip: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 12: enable_unrar: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 13: auto_disconnect: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 14: enable_par_cleanup: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 15: par_option: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 16: no_dupes: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 17: config_lock: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 18: safe_postproc: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 19: pause_on_post_processing: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 20: cleanup_list: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 21: ignore_samples: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 22: send_group: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 23: download_dir: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 24: download_free: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 25: complete_dir: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 26: script_dir: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 27: nzb_backup_dir: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 28: cache_dir: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 29: dirscan_dir: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 30: dirscan_speed: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 31: refresh_rate: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 32: rss_rate: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 33: bandwith_limit: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 34: cache_limit: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 35: email_server: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 36: email_to: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 37: email_from: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 38: email_account: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 39: email_pwd: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 40: email_endjob: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 41: email_full: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 42: schedlines: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 43: dirscan_opts: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 44: dirscan_script: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 45: top_only: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 46: auto_sort: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 47: enable_tv_sorting: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 48: tv_sort_string: command not found
none: prio 4
/home/jeroen/.sabnzbd/sabnzbd.ini: line 50: web_color: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 51: web_color2: command not found
;; connection timed out; no servers could be reached
it exists
these file are in /home/jeroen/
drwxrwxrwx 8 jeroenpeters users 4096 feb 27 14:06 .
drwxr-xr-x 6 root root 4096 feb 26 09:42 ..
-rwxrwxrwx 1 jeroen jeroen 5840 feb 28 09:43 .bash_history
-rwxrwxrwx 1 jeroenpeters users 220 feb 22 14:17 .bash_logout
-rwxrwxrwx 1 jeroenpeters users 3116 feb 22 14:17 .bashrc
drwxr-xr-x 4 jeroenpeters users 4096 feb 27 14:06 downloads
drwxrwxrwx 2 jeroenpeters users 4096 feb 23 07:38 .mc
-rwxrwxrwx 1 jeroenpeters users 675 feb 22 14:17 .profile
-rwxrwxrwx 1 root root 3691 feb 24 22:59 .rtorrent.rc
drwxr-xr-x 4 jeroenpeters users 4096 feb 27 14:06 .sabnzbd
drwxr-xr-x 6 jeroenpeters users 4096 feb 27 14:04 SABnzbd-0.4.6
-rwxr-xr-x 1 jeroenpeters users 2959360 dec 11 23:30 SABnzbd-0.4.6-src.tar
drwxrwxrwx 2 jeroenpeters users 4096 feb 22 16:49 .ssh
drwx------ 2 root root 4096 feb 26 14:42 .w3m
jeroenpeters@BP6:~$
And I changed the folder ls -al /home/jeroen/.sabnzbd/sabnzbd.ini
-rwxr-xr-x 1 jeroenpeters users 1974 feb 28 08:11 /home/jeroen/.sabnzbd/sabnzbd.ini
so that this folder kan be written to.
if now I etc/init.d/SABnzbd start
I get all this...........
et
jeroenpeters@BP6:~$ /etc/init.d/SABnzbd start
Starting SABnzbd.
Usage: SABnzbd.py [-f ]
Options marked [*] are stored in the config file
Options:
-f --config-file Location of config file
-s --server Listen on server:port [*]
-t --templates Template directory [*]
-2 --template2 Secondary template dir [*]
-l --logging Set logging level (0= least, 2= most) [*]
-w --weblogging Set cherrypy logging (0= off, 1= on) [*]
-b --browser Auto browser launch (0= off, 1= on) [*]
-d --daemon Fork daemon process
--permissions Set the chmod mode (e.g. o=rwx,g=rwx) [*]
--force Discard web-port timeout (see Wiki!)
-h --help Print this message
-v --version Print version information
-c --clean Remove queue, cache and logs
-p --pause Start in paused mode
/home/jeroen/.sabnzbd/sabnzbd.ini: line 1: __version__: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 2: [misc]: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 3: log_dir: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 4: auto_browser: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 5: permissions: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 6: check_new_rel: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 7: replace_spaces: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 8: replace_illegal: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 9: fail_on_crc: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 10: enable_filejoin: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 11: enable_unzip: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 12: enable_unrar: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 13: auto_disconnect: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 14: enable_par_cleanup: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 15: par_option: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 16: no_dupes: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 17: config_lock: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 18: safe_postproc: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 19: pause_on_post_processing: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 20: cleanup_list: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 21: ignore_samples: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 22: send_group: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 23: download_dir: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 24: download_free: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 25: complete_dir: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 26: script_dir: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 27: nzb_backup_dir: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 28: cache_dir: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 29: dirscan_dir: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 30: dirscan_speed: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 31: refresh_rate: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 32: rss_rate: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 33: bandwith_limit: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 34: cache_limit: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 35: email_server: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 36: email_to: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 37: email_from: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 38: email_account: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 39: email_pwd: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 40: email_endjob: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 41: email_full: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 42: schedlines: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 43: dirscan_opts: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 44: dirscan_script: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 45: top_only: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 46: auto_sort: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 47: enable_tv_sorting: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 48: tv_sort_string: command not found
none: prio 4
/home/jeroen/.sabnzbd/sabnzbd.ini: line 50: web_color: command not found
/home/jeroen/.sabnzbd/sabnzbd.ini: line 51: web_color2: command not found
;; connection timed out; no servers could be reached
Re: Debian install doesn't work wont run as normal user
Code: Select all
/usr/bin/sudo -u jeroenpeters -H /home/jeroen/SABnzbd/SABnzbd.py -d -f
/home/jeroen/.sabnzbd/sabnzbd.iniIt should be this:
Code: Select all
/usr/bin/sudo -u jeroenpeters -H /home/jeroen/SABnzbd/SABnzbd.py -d -f /home/jeroen/.sabnzbd/sabnzbd.ini