HTTPS access

Get help with all aspects of SABnzbd
Forum rules
Help us help you:
  • Are you using the latest stable version of SABnzbd? Downloads page.
  • Tell us what system you run SABnzbd on.
  • Adhere to the forum rules.
  • Do you experience problems during downloading?
    Check your connection in Status and Interface settings window.
    Use Test Server in Config > Servers.
    We will probably ask you to do a test using only basic settings.
  • Do you experience problems during repair or unpacking?
    Enable +Debug logging in the Status and Interface settings window and share the relevant parts of the log here using [ code ] sections.
Post Reply
Nilsen
Newbie
Newbie
Posts: 5
Joined: June 15th, 2011, 7:26 pm

HTTPS access

Post by Nilsen »

Hi, hoping someone can help me since I have no idea what the problem I'm having is.
Basically I cant access Sabnzbd from a connection outside my network on the https:// address.
SABnzbd Host is 0.0.0.0
Https support is enabled, https port is 9090.
The machine running Sabnzbd has a static ip, and port 9090 is forwarded in the router, no firewall on the machine running sabnzbd.

Trying to access sabnzbd from https://79.***.***.249/9090 gives me a can't establish a connection to the server error.
Accessing from https://192.168.0.100/9090 works though.

Any ideas?
User avatar
shypike
Administrator
Administrator
Posts: 19774
Joined: January 18th, 2008, 12:49 pm

Re: HTTPS access

Post by shypike »

You're supposed to use: https://79.***.***.249:9090/sabnzbd
Nilsen
Newbie
Newbie
Posts: 5
Joined: June 15th, 2011, 7:26 pm

Re: HTTPS access

Post by Nilsen »

shypike wrote:You're supposed to use: https://79.***.***.249:9090/sabnzbd
Oh, ok. Thank you, but it still doesn't work.
User avatar
shypike
Administrator
Administrator
Posts: 19774
Joined: January 18th, 2008, 12:49 pm

Re: HTTPS access

Post by shypike »

Tell your software firewall to allow incoming traffic from "the internet"
and not just from your local network.
User avatar
jcfp
Release Testers
Release Testers
Posts: 1004
Joined: February 7th, 2008, 12:45 pm

Re: HTTPS access

Post by jcfp »

Took the liberty of connecting to this host on port 9090: works fine (password protected and all). That leaves just the typo ("/" instead of ":"), or weirdness when trying to connect to the external 79.* ip address from within the lan.

Make sure you try from the outside, and with the correct syntax. http://canyouseeme.org/ is great for this.
Nilsen
Newbie
Newbie
Posts: 5
Joined: June 15th, 2011, 7:26 pm

Re: HTTPS access

Post by Nilsen »

Oh nice, just tried from an outside connection and it works fine indeed. Just doesn't work from the lan for some reason..
Thanks for the help!

Edit:
Called my isp and they set their built-in router in the modem from them to bridge mode and now I can connect to
https://79.***.***.249:9090/sabnzbd from my network as well :D
Post Reply