I'm not sure if this is a SabNZBd or an Unraid issue but my current setup is like this:
temp/incomplete = /mnt/cache/.sabnzbd/incomplete
complete = /mnt/cache/.sabnzbd/complete
i have categories setup in sabnzbd that move from the complete dir to /mnt/user/BLAH (my BLAH share is setup to use a cache drive)
The 'moving' stage takes a really long time considering it's going from the cache drive to the cache drive. Am I doing something wrong?
Could it be I don't have enough RAM? I only have 1GB installed but all I have on there is sabnzbd and cache_dirs enabled..
[SOLVED] unraid + sabnzb slow moving
Forum rules
Help us help you:
Help us help you:
- Are you using the latest stable version of SABnzbd? Downloads page.
- Tell us what system you run SABnzbd on.
- Adhere to the forum rules.
- Do you experience problems during downloading?
Check your connection in Status and Interface settings window.
Use Test Server in Config > Servers.
We will probably ask you to do a test using only basic settings. - Do you experience problems during repair or unpacking?
Enable +Debug logging in the Status and Interface settings window and share the relevant parts of the log here using [ code ] sections.
[SOLVED] unraid + sabnzb slow moving
Last edited by drawde on February 9th, 2012, 12:05 pm, edited 1 time in total.
unRAID 4.7 Pro: ASUS M4A88T-M | AMD Sempron 145 Sargas @ 2.8GHz | 1GB DDR3 SDRAM 1066 (PC3 8500) RAM | Antec NEO ECO 620C 620W PSU | NETGEAR gigE
Re: unraid + sabnzb slow moving
EDIT:
for anyone maybe having the same issue.. changing from /mnt/user/BLAH to /mnt/cache/BLAH fixed this
for anyone maybe having the same issue.. changing from /mnt/user/BLAH to /mnt/cache/BLAH fixed this
unRAID 4.7 Pro: ASUS M4A88T-M | AMD Sempron 145 Sargas @ 2.8GHz | 1GB DDR3 SDRAM 1066 (PC3 8500) RAM | Antec NEO ECO 620C 620W PSU | NETGEAR gigE