RSS - Stop x264 Shows

Get help with all aspects of SABnzbd
Forum rules
Help us help you:
  • Are you using the latest stable version of SABnzbd? Downloads page.
  • Tell us what system you run SABnzbd on.
  • Adhere to the forum rules.
  • Do you experience problems during downloading?
    Check your connection in Status and Interface settings window.
    Use Test Server in Config > Servers.
    We will probably ask you to do a test using only basic settings.
  • Do you experience problems during repair or unpacking?
    Enable +Debug logging in the Status and Interface settings window and share the relevant parts of the log here using [ code ] sections.
Post Reply
Vodka2
Newbie
Newbie
Posts: 32
Joined: September 29th, 2010, 5:17 am

RSS - Stop x264 Shows

Post by Vodka2 »

Hi All

Lately there has been a lot of posts on NZB Matrix that is " shows names HDTV x264 xxx " and normal " Shows name HDTV xxx "

So i want to know how do i stop the x264 versions of the shows for dling.

I have tried the reject in rss feed but nothing is working.

Please let me know.

Thanks
Vodka2
User avatar
shypike
Administrator
Administrator
Posts: 19774
Joined: January 18th, 2008, 12:49 pm

Re: RSS - Stop x264 Shows

Post by shypike »

Filters are tested one by one until a match occurs.
Your "Reject x264" should be the first filter.
Vodka2
Newbie
Newbie
Posts: 32
Joined: September 29th, 2010, 5:17 am

Re: RSS - Stop x264 Shows

Post by Vodka2 »

Thanks. I will give it a go :)
Vodka2
Newbie
Newbie
Posts: 32
Joined: September 29th, 2010, 5:17 am

Re: RSS - Stop x264 Shows

Post by Vodka2 »

OK. So i did what you said and still the shows ended up in the queue. Any other suggestions?

Reject *x264*

Thanks
J03 8LACK
Full Member
Full Member
Posts: 120
Joined: April 2nd, 2009, 1:33 am

Re: RSS - Stop x264 Shows

Post by J03 8LACK »

Vodka2,

Just a heads up X264 is the new standard for TV Rips:

x264 for television sources
February 20, 2012, the SD x264 TV Release Standards aims to bring quality control back to the SD releases. x264 has become the most advanced video codec and compared to Xvid it is able to provide higher quality and compression at greater SD resolutions. It also allows better control and transparency over encoding settings. With CRF it can be ensured that a diverse array of material will get the most appropriate bitrate and not arbitrary fixed file sizes. The video container must be MP4. This ruleset is also applicable for sport releases. Thirteen groups signed the document.

More information can be found here - http://scenenotice.org/details.php?id=2029

J03
User avatar
shypike
Administrator
Administrator
Posts: 19774
Joined: January 18th, 2008, 12:49 pm

Re: RSS - Stop x264 Shows

Post by shypike »

Vodka2 wrote:OK. So i did what you said and still the shows ended up in the queue. Any other suggestions?
Email a few screenshots of your filter list and the preview to [email protected]
There's probably something obvious that you missed.
Vodka2
Newbie
Newbie
Posts: 32
Joined: September 29th, 2010, 5:17 am

Re: RSS - Stop x264 Shows

Post by Vodka2 »

@ J03 8LACK

Thanks for the info. So x264 is the better bit rate then the normal HDTV releases.

Well now this going to be another Challenge since FQM & 2HD does not release there releases in x264 as far as i have seen (Could be mistaken)

Thanks
J03 8LACK
Full Member
Full Member
Posts: 120
Joined: April 2nd, 2009, 1:33 am

Re: RSS - Stop x264 Shows

Post by J03 8LACK »

Vodka2,

If you dont want 720P you just have to reject it.

Try this -
0 Rejects first ---------- 0 Reject - 720P (this will remove all 720p from the RSS feed)
----------------------- 1 Reject - 1080P (this will remove all 1080p from the RSS feed)
2 Requires next -------- 2 Requires - My.TV.Show.Or.Movie.Name (this will limit your feed to the show you want)
----------------------- 3 Requires - S14 (this will limit you to a Season)
4 Accepted last -------- 4 Accept - * (this allows everything that is left)


This was just an example

If this still doesn't do the trick you could always try writing it in Regular Expression (regex) just remember to put ( re: ) in front of your expression so Sabnzbd knows your writing it in (regex).

Hope it helps
J03
psycik
Full Member
Full Member
Posts: 108
Joined: September 28th, 2009, 2:33 pm

Re: RSS - Stop x264 Shows

Post by psycik »

I was just going to post about this and see someone else had already.

Is there anything that could be added (specific to category tv shows) that checks for duplicated showname.SxxExx.ignorerest?

Also if the episode descriptor is 501 or 5x01 type format? Maybe in logic convert them to S05E01 format when checking for duplicated - or would that be too hard?
User avatar
shypike
Administrator
Administrator
Posts: 19774
Joined: January 18th, 2008, 12:49 pm

Re: RSS - Stop x264 Shows

Post by shypike »

If you want more sophistication, use SickBeard as a front-end.
We do have some plans for improvement, but not to the level of SickBeard.
Vodka2
Newbie
Newbie
Posts: 32
Joined: September 29th, 2010, 5:17 am

Re: RSS - Stop x264 Shows

Post by Vodka2 »

Ok i have tried to get it to stop but it is still dling.

I have tired the following.

0 Reject x264
0 Reject *x264*
0 Reject* *HDTV*x264*

So what is the next step to stop x264.

Thanks
fenlander
Newbie
Newbie
Posts: 36
Joined: May 4th, 2010, 5:47 am

Re: RSS - Stop x264 Shows

Post by fenlander »

Maybe
Requires: XVID
will achieve the same effect. Failing that, have you tried any other indexers? NZBIndex will let you set up a pretty comprehensive set of filters on the rss feed, including filtering for xvid or excluding x264.
Vodka2
Newbie
Newbie
Posts: 32
Joined: September 29th, 2010, 5:17 am

Re: RSS - Stop x264 Shows

Post by Vodka2 »

Thanks fenlander

I will give it a try and report back.
Vodka2
Newbie
Newbie
Posts: 32
Joined: September 29th, 2010, 5:17 am

SOLVED - RSS - Stop x264 Shows

Post by Vodka2 »

SOLVED ;D

So i tried what fenlander mentioned and it worked :)

0 Requires *XviD* Default Default Default

Thanks to all for the help on this.

This post can get closed.
Post Reply