OSX no startup with 0.0.0.0 host

Report & discuss bugs found in SABnzbd
Forum rules
Help us help you:
  • Are you using the latest stable version of SABnzbd? Downloads page.
  • Tell us what system you run SABnzbd on.
  • Adhere to the forum rules.
  • Do you experience problems during downloading?
    Check your connection in Status and Interface settings window.
    Use Test Server in Config > Servers.
    We will probably ask you to do a test using only basic settings.
  • Do you experience problems during repair or unpacking?
    Enable +Debug logging in the Status and Interface settings window and share the relevant parts of the log here using [ code ] sections.
Post Reply
g1zm0
Newbie
Newbie
Posts: 24
Joined: February 7th, 2010, 7:57 am

OSX no startup with 0.0.0.0 host

Post by g1zm0 »

Hey Guys,

Just upgraded, SAB fails to start when given 0.0.0.0 as a host. When i change it to localhost in the dir all works fine.

Here is the log:

Code: Select all

2012-06-21 19:28:12,937::INFO::[_cplogging:55] [21/Jun/2012:19:28:12] ENGINE Bus STARTING
2012-06-21 19:28:12,993::INFO::[_cplogging:55] [21/Jun/2012:19:28:12] ENGINE Started monitor thread '_TimeoutMonitor'.
2012-06-21 19:28:12,995::ERROR::[_cplogging:55] [21/Jun/2012:19:28:12] ENGINE Error in HTTP server: shutting down
Traceback (most recent call last):
  File "cherrypy/process/servers.pyc", line 75, in _start_http_thread
  File "cherrypy/wsgiserver/__init__.pyc", line 1644, in start
error: [Errno 49] Can't assign requested address

2012-06-21 19:28:12,995::INFO::[_cplogging:55] [21/Jun/2012:19:28:12] ENGINE Bus STOPPING
2012-06-21 19:28:12,995::INFO::[_cplogging:55] [21/Jun/2012:19:28:12] ENGINE HTTP Server None already shut down
2012-06-21 19:28:12,996::INFO::[_cplogging:55] [21/Jun/2012:19:28:12] ENGINE HTTP Server cherrypy._cpwsgi_server.CPWSGIServer(('fe80::1%lo0', 8080)) already shut down
2012-06-21 19:28:13,003::INFO::[_cplogging:55] [21/Jun/2012:19:28:13] ENGINE Stopped thread '_TimeoutMonitor'.
2012-06-21 19:28:13,003::INFO::[_cplogging:55] [21/Jun/2012:19:28:13] ENGINE Bus STOPPED
2012-06-21 19:28:13,004::INFO::[_cplogging:55] [21/Jun/2012:19:28:13] ENGINE Bus EXITING
2012-06-21 19:28:13,004::INFO::[_cplogging:55] [21/Jun/2012:19:28:13] ENGINE Bus EXITED
2012-06-21 19:28:13,094::ERROR::[_cplogging:55] [21/Jun/2012:19:28:13] ENGINE Error in 'start' listener <bound method ServerAdapter.start of <cherrypy.process.servers.ServerAdapter object at 0x14baac30>>
Traceback (most recent call last):
  File "cherrypy/process/wspbus.pyc", line 147, in publish
  File "cherrypy/process/servers.pyc", line 62, in start
  File "cherrypy/process/servers.pyc", line 97, in wait
error: [Errno 49] Can't assign requested address

2012-06-21 19:28:13,197::INFO::[_cplogging:55] [21/Jun/2012:19:28:13] ENGINE Serving on 0.0.0.0:8080
2012-06-21 19:28:13,198::ERROR::[_cplogging:55] [21/Jun/2012:19:28:13] ENGINE Shutting down due to error in start listener:
Traceback (most recent call last):
  File "cherrypy/process/wspbus.pyc", line 184, in start
  File "cherrypy/process/wspbus.pyc", line 147, in publish
  File "cherrypy/process/servers.pyc", line 62, in start
  File "cherrypy/process/servers.pyc", line 97, in wait
error: [Errno 49] Can't assign requested address

2012-06-21 19:28:13,198::INFO::[_cplogging:55] [21/Jun/2012:19:28:13] ENGINE Bus STOPPING
2012-06-21 19:28:13,211::INFO::[_cplogging:55] [21/Jun/2012:19:28:13] ENGINE HTTP Server cherrypy._cpwsgi_server.CPWSGIServer(('0.0.0.0', 8080)) shut down
2012-06-21 19:28:13,211::INFO::[_cplogging:55] [21/Jun/2012:19:28:13] ENGINE HTTP Server cherrypy._cpwsgi_server.CPWSGIServer(('fe80::1%lo0', 8080)) already shut down
2012-06-21 19:28:13,212::INFO::[_cplogging:55] [21/Jun/2012:19:28:13] ENGINE No thread running for _TimeoutMonitor.
2012-06-21 19:28:13,212::INFO::[_cplogging:55] [21/Jun/2012:19:28:13] ENGINE Bus STOPPED
2012-06-21 19:28:13,212::INFO::[_cplogging:55] [21/Jun/2012:19:28:13] ENGINE Bus EXITING
2012-06-21 19:28:13,212::INFO::[_cplogging:55] [21/Jun/2012:19:28:13] ENGINE Bus EXITED
2012-06-21 19:28:13,213::ERROR::[SABnzbd:1474] Failed to start web-interface: 
Traceback (most recent call last):
  File "/Users/plex/Downloads/SABnzbd-0.7.0/OS X 10.5 and Below/SABnzbd.app/Contents/Resources/SABnzbd.py", line 1466, in main
  File "cherrypy/process/wspbus.pyc", line 184, in start
  File "cherrypy/process/wspbus.pyc", line 147, in publish
  File "cherrypy/process/servers.pyc", line 62, in start
  File "cherrypy/process/servers.pyc", line 97, in wait
error: [Errno 49] Can't assign requested address
2012-06-21 19:28:13,213::ERROR::[SABnzbd:301] Failed to start web-interface : [Errno 49] Can't assign requested address
2012-06-21 19:28:13,977::INFO::[_cplogging:55] [21/Jun/2012:19:28:13] ENGINE Bus STOPPING
2012-06-21 19:28:13,978::INFO::[_cplogging:55] [21/Jun/2012:19:28:13] ENGINE HTTP Server cherrypy._cpwsgi_server.CPWSGIServer(('0.0.0.0', 8080)) already shut down
2012-06-21 19:28:13,978::INFO::[_cplogging:55] [21/Jun/2012:19:28:13] ENGINE HTTP Server cherrypy._cpwsgi_server.CPWSGIServer(('fe80::1%lo0', 8080)) already shut down
2012-06-21 19:28:13,978::INFO::[_cplogging:55] [21/Jun/2012:19:28:13] ENGINE No thread running for _TimeoutMonitor.
2012-06-21 19:28:13,978::INFO::[_cplogging:55] [21/Jun/2012:19:28:13] ENGINE Bus STOPPED
2012-06-21 19:28:13,979::INFO::[_cplogging:55] [21/Jun/2012:19:28:13] ENGINE Bus EXITING
2012-06-21 19:28:13,979::INFO::[_cplogging:55] [21/Jun/2012:19:28:13] ENGINE Bus EXITED
Top
User avatar
shypike
Administrator
Administrator
Posts: 19774
Joined: January 18th, 2008, 12:49 pm

Re: OSX no startup with 0.0.0.0 host

Post by shypike »

Poor DNS setup.
What happens if you open a Terminal window (Utilities) and type
uname -n
This should show a name. Then type
ping name
Where "name" is the result from uname.

The next release will have a work-around for this problem.

BTW: are you using VMWare Fusion or Parallels?
Top
g1zm0
Newbie
Newbie
Posts: 24
Joined: February 7th, 2010, 7:57 am

Re: OSX no startup with 0.0.0.0 host

Post by g1zm0 »

Not using VMware or Parallels,

uname -n returns:

plex.local

ping plex.local returns :

64 bytes from 192.168.0.109: icmp_seq=72 ttl=64 time=0.067 ms
64 bytes from 192.168.0.109: icmp_seq=73 ttl=64 time=0.067 ms
Top
User avatar
shypike
Administrator
Administrator
Posts: 19774
Joined: January 18th, 2008, 12:49 pm

Re: OSX no startup with 0.0.0.0 host

Post by shypike »

That is strange... So, it's not a DNS problem.
You also don't have some software firewall on your Mac?

Can you try these variants in succession?
First stop SABnzbd and open a Terminal.
Stop SABnzbd after each start (using the top menu, don't try ^C).

/Applications/SABnzbd.app/Content/MacOS/SABnzbd --console --server 127.0.0.1:8080
/Applications/SABnzbd.app/Content/MacOS/SABnzbd --console --server ::1:8080
/Applications/SABnzbd.app/Content/MacOS/SABnzbd --console --server :8080
/Applications/SABnzbd.app/Content/MacOS/SABnzbd --console --server plex.local:8080
Top
g1zm0
Newbie
Newbie
Posts: 24
Joined: February 7th, 2010, 7:57 am

Re: OSX no startup with 0.0.0.0 host

Post by g1zm0 »

Ok, so:

/Applications/SABnzbd.app/Content/MacOS/SABnzbd --console --server 127.0.0.1:8080:

Code: Select all

Plex:~ plex$ /Applications/SABnzbd.app/Contents/MacOS/SABnzbd --console --server 127.0.0.1:8080
INFO:cherrypy.error:[21/Jun/2012:20:41:52] ENGINE Bus STARTING
INFO:cherrypy.error:[21/Jun/2012:20:41:52] ENGINE Started monitor thread '_TimeoutMonitor'.
INFO:cherrypy.error:[21/Jun/2012:20:41:52] ENGINE Serving on 127.0.0.1:8080
INFO:cherrypy.error:[21/Jun/2012:20:41:52] ENGINE Bus STARTED
/Applications/SABnzbd.app/Content/MacOS/SABnzbd --console --server ::1:8080"

Code: Select all

INFO:cherrypy.error:[21/Jun/2012:20:43:36] ENGINE Bus STARTING
INFO:cherrypy.error:[21/Jun/2012:20:43:36] ENGINE Started monitor thread '_TimeoutMonitor'.
INFO:cherrypy.error:[21/Jun/2012:20:43:37] ENGINE Serving on ::1:8080
INFO:cherrypy.error:[21/Jun/2012:20:43:37] ENGINE Bus STARTED
INFO:cherrypy.error:[21/Jun/2012:20:43:52] ENGINE Bus STOPPING
INFO:cherrypy.error:[21/Jun/2012:20:43:52] ENGINE HTTP Server cherrypy._cpwsgi_server.CPWSGIServer(('::1', 8080)) shut down
INFO:cherrypy.error:[21/Jun/2012:20:43:52] ENGINE Stopped thread '_TimeoutMonitor'.
INFO:cherrypy.error:[21/Jun/2012:20:43:52] ENGINE Bus STOPPED
INFO:cherrypy.error:[21/Jun/2012:20:43:52] ENGINE Bus EXITING
INFO:cherrypy.error:[21/Jun/2012:20:43:52] ENGINE Bus EXITED
Plex:~ plex$
/Applications/SABnzbd.app/Contents/MacOS/SABnzbd --console --server :8080

Code: Select all

INFO:cherrypy.error:[21/Jun/2012:20:48:32] ENGINE Bus STARTING
INFO:cherrypy.error:[21/Jun/2012:20:48:32] ENGINE Started monitor thread '_TimeoutMonitor'.
INFO:cherrypy.error:[21/Jun/2012:20:48:32] ENGINE Serving on 192.168.0.109:8080
INFO:cherrypy.error:[21/Jun/2012:20:48:32] ENGINE Bus STARTED
/Applications/SABnzbd.app/Content/MacOS/SABnzbd --console --server plex.local:8080:

Code: Select all

INFO:cherrypy.error:[21/Jun/2012:20:49:44] ENGINE Bus STARTING
INFO:cherrypy.error:[21/Jun/2012:20:49:44] ENGINE Started monitor thread '_TimeoutMonitor'.
INFO:cherrypy.error:[21/Jun/2012:20:49:44] ENGINE Serving on 192.168.0.109:8080
INFO:cherrypy.error:[21/Jun/2012:20:49:44] ENGINE Bus STARTED
Top
g1zm0
Newbie
Newbie
Posts: 24
Joined: February 7th, 2010, 7:57 am

Re: OSX no startup with 0.0.0.0 host

Post by g1zm0 »

Oh, and i definitely dont have any software firewalls running
Top
User avatar
shypike
Administrator
Administrator
Posts: 19774
Joined: January 18th, 2008, 12:49 pm

Re: OSX no startup with 0.0.0.0 host

Post by shypike »

OK, so for some reason IPV6 isn't doing what it's supposed to do.
::1 is the IPv6 value for localhost, while 127.0.0.1 is that for IPv4.

Can you try this in a Terminal?
ping6 ::1
Top
g1zm0
Newbie
Newbie
Posts: 24
Joined: February 7th, 2010, 7:57 am

Re: OSX no startup with 0.0.0.0 host

Post by g1zm0 »

sure:

Code: Select all

PING6(56=40+8+8 bytes) ::1 --> ::1
16 bytes from ::1, icmp_seq=0 hlim=64 time=2.242 ms
16 bytes from ::1, icmp_seq=1 hlim=64 time=0.096 ms
16 bytes from ::1, icmp_seq=2 hlim=64 time=0.155 ms
16 bytes from ::1, icmp_seq=3 hlim=64 time=0.086 ms
16 bytes from ::1, icmp_seq=4 hlim=64 time=0.134 ms
16 bytes from ::1, icmp_seq=5 hlim=64 time=0.116 ms
Top
User avatar
shypike
Administrator
Administrator
Posts: 19774
Joined: January 18th, 2008, 12:49 pm

Re: OSX no startup with 0.0.0.0 host

Post by shypike »

The only explanation I have is that ::1 port 8080 is occupied.
But that's not a satisfactory either, since localhost binds to both 127.0.0.1 and ::1

Have you tried any other port?
You can work around the issue by using plex.local as host name.
That is, if you want external access, otherwise use 127.0.0.1
Top
g1zm0
Newbie
Newbie
Posts: 24
Joined: February 7th, 2010, 7:57 am

Re: OSX no startup with 0.0.0.0 host

Post by g1zm0 »

just tried again with 0.0.0.0 on port 8088, same problems

Thanks for the work around, really appreciate your help!
Top
User avatar
shypike
Administrator
Administrator
Posts: 19774
Joined: January 18th, 2008, 12:49 pm

Re: OSX no startup with 0.0.0.0 host

Post by shypike »

Weird, still.
Do you mind if I PM you when I think I have a solution (or more questions)?
Top
g1zm0
Newbie
Newbie
Posts: 24
Joined: February 7th, 2010, 7:57 am

Re: OSX no startup with 0.0.0.0 host

Post by g1zm0 »

not at all, happy to help however I can.
Top
houdini2286
Newbie
Newbie
Posts: 5
Joined: August 7th, 2012, 11:58 pm

Re: OSX no startup with 0.0.0.0 host

Post by houdini2286 »

Was there a resolution to this? I'm having a similar issue: http://forums.sabnzbd.org/viewtopic.php?f=2&t=11417
Top
User avatar
shypike
Administrator
Administrator
Posts: 19774
Joined: January 18th, 2008, 12:49 pm

Re: OSX no startup with 0.0.0.0 host

Post by shypike »

Open a Terminal window (Applications->Utilities->Terminal) and type:
/Applications/SABnzbd.app/Contents/MacOS/SABnzbd --no_ipv6 -s 0.0.0.0:8080
Enter

Do this once.
Top
xbbdc
Newbie
Newbie
Posts: 1
Joined: August 14th, 2012, 6:25 pm

Re: OSX no startup with 0.0.0.0 host

Post by xbbdc »

shypike wrote:Open a Terminal window (Applications->Utilities->Terminal) and type:
/Applications/SABnzbd.app/Contents/MacOS/SABnzbd --no_ipv6 -s 0.0.0.0:8080
Enter

Do this once.
thanks this worked for me!
Top
Post Reply

Return to “Bug Reports”