SABnzbd Forums

ko0ky wrote:I'm trying to put together a tutorial for newbie users like myself who might need some help setting up newznab on windows. I somewhat got this going (time will tell how good it's working).

A big Thanks to medoix on the IRC channel for his help!

I expect this tutorial to be a work in progress. If I missed a step or did something wrong, don't flame me, I'm just offering a bit of help for the next guy.

The instructions included with the download seemed a bit lacking for window users, especially for those of us who don't do much with php, apache, curl and other apps needed for this to work. Also I couldn't find much on this forum.

Here's the steps I did to get it working. (notice: I wasn't concerned with SSL at this time, so I didn't worry about setting it up. If this is something you are concerned about you may need some better instructions)

First I installed an apache/curl/pear/php/blah blah pack.. - http://www.apachefriends.org/en/xampp-windows.html (Dont be mislead, the download link is near the bottom where you choose if you want to download a zip/install file or 7zip) I decided on the install file I installed to the default location c:\xampp

Next I installed TortoiseSVN which was recommended to grab newznab. http://tortoisesvn.net/downloads.html after installing it I ran it and used the login information provided when I purchased NNPLUS (some of you not using NNPLUS may need to skip this part.. I have no idea how you download the non plus version), I nagivated to c:\xampp\htdocs and right mouse clicked where I found a new menu option (after installing tortoisesvn) and selected SVN checkout. It created a folder c:\xampp\htdocs\nnplus (YES I might have downloaded this to the wrong directory.. or perhaps could have changed it a bit.. but it didn't matter much to me. My url is http://127.0.0.1/nnplus/www which is fine with me)

Next navigate to c:\xampp\php and open php.ini - search for "memory limit".. set at 256, next search for "minimum execution time" and set to 60. (keep php.ini open for next step)

Next I reviewed this page http://www.tonyspencer.com/2003/10/22/c ... n-windows/ for setting up curl on windows box. I had to make a few adjustments. TAKE NOTE his install is d:\apps , using this setup our install dir is c:\xampp.. You can skip "- set extensions_dir to d:\apps\php\extensions" it's all set correctly. Next in php.ini search for "register_globals =" and set to On, next search php.ini for "session.save_path =" make sure you see session.save_path = "C:\xampp\tmp"

Copy php5ts.dll (located in c:\xampp\php\) to your c:\xampp\Apache\bin folder
Copy libeay32.dll and ssleay32.dll (located in c:\xampp\php\) to c:\windows\system32

download curl.exe from http://curl.haxx.se/download.html - I used win32 generic - I put curl.exe in c:\xampp

[Windows XP Install Only] Check to see if you have the following file: c:\windows\system32\msvcr70.dll. If not, search for it in Google and download it to system32. You may get error messages without it. ( I didn't have a problem with this.. I am using windows 2008 )

Uncomment the curl line in your php.ini file to enable curl: extension=php_curl.dll

I skipped the rest of steps on that curl page, PHP was working fine so I didn't need to mess with that.

in php.ini search for "E_ALL | E_STRICT" and change to E_ALL ^ E_STRICT

save php.ini - restart apache (you can use xampp control panel (located in your taskbar near the clock) to stop and start the service.

You will need to add c:\xampp\php to your system variable path (right click my computer - properties - advanced system settings - advanced - Environment Variables... in the system variables find PATH, double click and at the very end add c:\xampp\php

Now continue with the steps provided from the INSTALL.TXT file from newznab:

3) Browse to http://yournewznabserver/install. (the example above.. or mine was http://172.0.0.1/nnplus/www/install
refer to the list of requirements above if you encounter any errors during install, or the FAQ in the README
4) Once installed activate only one or two groups to test with first (a.b.linux.iso is a good choice), this
will save you time if it is not working correctly.
5) Run the update_binaries.php and update_releases.php scripts in \misc\update_scripts\ via command-line.
6) If updating was successful then you can continue to setup your site and configure the update scripts for
auto-updating. windows users use the script /misc/update_scripts/win_scripts/runme.bat


THIS SHOULD GET YOU UP and running unless I over looked something.. Please comment if this has helped you or if I left something out. I will try my best to help in any way I can.

Hope this helps someone!

ko0ky wrote:I'm trying to put together a tutorial for newbie users like myself who might need some help setting up newznab on windows. I somewhat got this going (time will tell how good it's working).

A big Thanks to medoix on the IRC channel for his help!

I expect this tutorial to be a work in progress. If I missed a step or did something wrong, don't flame me, I'm just offering a bit of help for the next guy.

The instructions included with the download seemed a bit lacking for window users, especially for those of us who don't do much with php, apache, curl and other apps needed for this to work. Also I couldn't find much on this forum.

Here's the steps I did to get it working. (notice: I wasn't concerned with SSL at this time, so I didn't worry about setting it up. If this is something you are concerned about you may need some better instructions)

First I installed an apache/curl/pear/php/blah blah pack.. - http://www.apachefriends.org/en/xampp-windows.html (Dont be mislead, the download link is near the bottom where you choose if you want to download a zip/install file or 7zip) I decided on the install file I installed to the default location c:\xampp

Next I installed TortoiseSVN which was recommended to grab newznab. http://tortoisesvn.net/downloads.html after installing it I ran it and used the login information provided when I purchased NNPLUS (some of you not using NNPLUS may need to skip this part.. I have no idea how you download the non plus version), I nagivated to c:\xampp\htdocs and right mouse clicked where I found a new menu option (after installing tortoisesvn) and selected SVN checkout. It created a folder c:\xampp\htdocs\nnplus (YES I might have downloaded this to the wrong directory.. or perhaps could have changed it a bit.. but it didn't matter much to me. My url is http://127.0.0.1/nnplus/www which is fine with me)

Next navigate to c:\xampp\php and open php.ini - search for "memory limit".. set at 256, next search for "minimum execution time" and set to 60. (keep php.ini open for next step)

Next I reviewed this page http://www.tonyspencer.com/2003/10/22/c ... n-windows/ for setting up curl on windows box. I had to make a few adjustments. TAKE NOTE his install is d:\apps , using this setup our install dir is c:\xampp.. You can skip "- set extensions_dir to d:\apps\php\extensions" it's all set correctly. Next in php.ini search for "register_globals =" and set to On, next search php.ini for "session.save_path =" make sure you see session.save_path = "C:\xampp\tmp"

Copy php5ts.dll (located in c:\xampp\php\) to your c:\xampp\Apache\bin folder
Copy libeay32.dll and ssleay32.dll (located in c:\xampp\php\) to c:\windows\system32

download curl.exe from http://curl.haxx.se/download.html - I used win32 generic - I put curl.exe in c:\xampp

[Windows XP Install Only] Check to see if you have the following file: c:\windows\system32\msvcr70.dll. If not, search for it in Google and download it to system32. You may get error messages without it. ( I didn't have a problem with this.. I am using windows 2008 )

Uncomment the curl line in your php.ini file to enable curl: extension=php_curl.dll

I skipped the rest of steps on that curl page, PHP was working fine so I didn't need to mess with that.

in php.ini search for "E_ALL | E_STRICT" and change to E_ALL ^ E_STRICT

save php.ini - restart apache (you can use xampp control panel (located in your taskbar near the clock) to stop and start the service.

You will need to add c:\xampp\php to your system variable path (right click my computer - properties - advanced system settings - advanced - Environment Variables... in the system variables find PATH, double click and at the very end add c:\xampp\php

Now continue with the steps provided from the INSTALL.TXT file from newznab:

3) Browse to http://yournewznabserver/install. (the example above.. or mine was http://172.0.0.1/nnplus/www/install
refer to the list of requirements above if you encounter any errors during install, or the FAQ in the README
4) Once installed activate only one or two groups to test with first (a.b.linux.iso is a good choice), this
will save you time if it is not working correctly.
5) Run the update_binaries.php and update_releases.php scripts in \misc\update_scripts\ via command-line.
6) If updating was successful then you can continue to setup your site and configure the update scripts for
auto-updating. windows users use the script /misc/update_scripts/win_scripts/runme.bat


THIS SHOULD GET YOU UP and running unless I over looked something.. Please comment if this has helped you or if I left something out. I will try my best to help in any way I can.

Hope this helps someone!

88keyz wrote:With the free version you have to write your own regexs, if you donate you get access to the community developed regexs. Much easier to donate.

• bnedhe8utrh5tnbg9
  Cnffjbeq Oynpx Fhaqnl
  erghb76565hf
  zed19997
  ich26438
  b23e2eca836b4822d34c55187c0c0d687f4f4edc9215cccad09f2ee4bc015db4
  3d3ba5d70f8688c4862e447a7da148fd1d8f710ec3c21ab7894d17d0f84f36cb
  79c092ed551155f9dd32b21f1083e1a02f42439bab151ca1bced8e6b703a55ce
  zed19996
  ich26437
  ich26436
  77e943f2393318e595e8d8a909cf3169f3c55c43589c31fbcb629054b9254e5a