SABnzbd Forums

I already downgraded to 1.00 and did a queue repair, but I can verify I do not have QuickCheck turned on.

When I downgraded, nothing would work until I forced a queue repair. I tried force and repair and nothing changed. Just to try and answer some of the earlier questions.

safihre wrote:We think it is a problem when QuickCheck is turned off and Download all par2 is turned on.

Enable QuickCheck and do a Queue-repair to finish the stalled jobs.

Going to work on a real fix now!

To follow-up on safihre's post.

Here are my settings in /config/switches/

Enable QuickCheck : DISABLED
Download all par2 files : ENABLED
Post-Process Only Verified Jobs : DISABLED

I will do your tests this weekend (the ones you asked me in PM).

Best Regards,

I think I have quick check on already. Should I toggle the par2 setting to off if it's on.

Indeed the problem is in the Download all par2 function, turning that off might also work on it's own.

Ok i can confirm that on 1.0.1, just having download a par2 files and enable quick check disabled allowed for the continuation into post processing without intervention from myself.

safihre wrote:Indeed the problem is in the Download all par2 function, turning that off might also work on it's own.

I think its the download all par2 that bugs as well..

My settings were:


Enable QuickCheck : ENABLED
Download all par2 files : ENABLED
Post-Process Only Verified Jobs : DISABLED

changed it to


Enable QuickCheck : DISABLED
Download all par2 files : DISABLED
Post-Process Only Verified Jobs : DISABLED

And now it works fine.

I had the problem that my downloads went to 100+% so 108% or so .. and never finished.

We know why it happens.
There will be a solution in 1.0.2

I've got the same problem, just started in the past few days, the queue stalls at 100% with no post processing. I tried making the changes suggested in the previous posts (tuning off quick check and download all par2) but I can't get the queue to start processing the items stalled in the queue. Any thoughts. When do you think 1.0.2 will be released. Sabnzbd 1.0.1 is running on Ubuntu 14.04.

1.0.2 is out. Please let us know whether it helps.
Stalled jobs can be forced to go to post processing by setting the priority to "Stop".

Hey Shypike,

I am upgrading to 1.0.2 as i write those lines. My queue have about 170 items. I'll let you guys know if the issues are still there.

For reference, I won't change my SAB settings for testing purposes.

Enable QuickCheck : DISABLED
Download all par2 files : ENABLED
Post-Process Only Verified Jobs : DISABLED

Best Regards,

-Rw

Hello again,

Just a quick update, so far so good !

Four items successfully downloaded/post-processed. If anything, I'll let you guys know here. I will continue to do spot checks until the queue is empty.

Regards,

- Rw

Just did a test run, problem seems to be fixed. Thankyou guys very much for the fast turn around on this.

safihre wrote:We think it is a problem when QuickCheck is turned off and Download all par2 is turned on.

Enable QuickCheck, disable Download all par2 and do a Queue-repair to finish the stalled jobs.

Going to work on a real fix now!

Hey, this is still a problem in latest version 1.0.2 (windows) just so you know.

PS: dont know if it was just repaired or not. I woke up and saw a download stuck at 100% complete in queue.

Stuck at 99% is a different problem than stuck at 100%.
The latter we fixed.
The former is much more complicated; so far we haven't been able to reproduce it.
The difference is that, at 99%, there are still articles to be downloaded.
What we've seen so far is that it can be caused by servers timing out on missing articles.

I see. I did not get any errors that i saw so not much to go on. I will look at the log next time