Page 4 of 5
Re: sabnzbd with nzbdrone
Posted: November 11th, 2014, 9:48 pm
by kevindd992002
markus101 wrote:Sonarr (NzbDrone) won't remove attempt to remove something if its not in queue/history. I think from here Debug logging for both Sonarr and SAB would be helpful to see the call from Sonarr to SAB since there have been a number of changes on the Sonarr side (2.0.0.2180). Also make sure Retry is set to 0 in failed download settings (advanced):
https://db.tt/QAHLnjnL - which will eliminate retrying causing issues, if there are still issues then we know to look elsewhere.
Ok. So if I wanted to use that retry feature, I won't be able to do so because of this issue? Is that beneficial and useful at all?
Re: sabnzbd with nzbdrone
Posted: November 11th, 2014, 9:53 pm
by markus101
I should have been more clear, I want you to disable it to ensure it doesn't cause issues, it could be causing issues, or it could not be (its not for me for example), but disabling means we can verify if the issue still exists and go from there. Its beneficial when propagation issues cause delays in getting to your servers, but for older releases (past the grace period) it has zero benefit.
Re: sabnzbd with nzbdrone
Posted: November 12th, 2014, 3:17 am
by kevindd992002
markus101 wrote:I should have been more clear, I want you to disable it to ensure it doesn't cause issues, it could be causing issues, or it could not be (its not for me for example), but disabling means we can verify if the issue still exists and go from there. Its beneficial when propagation issues cause delays in getting to your servers, but for older releases (past the grace period) it has zero benefit.
Gotcha. I'll troubleshoot further and will report back on how it goes. Thanks.
Re: sabnzbd with nzbdrone
Posted: November 12th, 2014, 5:40 am
by shypike
Can you test with 0.7.20RC1?
There's a tiny change that may help in some situations.
(Also an extension of the Retry API-call, but that doesn't affect this problem.)
Re: sabnzbd with nzbdrone
Posted: November 12th, 2014, 8:53 am
by kevindd992002
shypike wrote:Can you test with 0.7.20RC1?
There's a tiny change that may help in some situations.
(Also an extension of the Retry API-call, but that doesn't affect this problem.)
Sure, I'll look into that. Should I test with or without the retry feature of sonarr?
Re: sabnzbd with nzbdrone
Posted: November 12th, 2014, 10:48 am
by shypike
kevindd992002 wrote:
Sure, I'll look into that. Should I test with or without the retry feature of sonarr?
I guess without. The improvement in SABnzbd isn't being used yet by nzbDrone.
Re: sabnzbd with nzbdrone
Posted: April 21st, 2015, 1:43 pm
by MKANET
I'm curious was there ever a resolution to this issue (from either Sonarr or SABnzbd)? SABnzbd stops completely every time it runs into this error; requiring me to manually start it. Im not sure what caused this issue to start happening in the first place. Any suggestions would be appreciated.
Re: sabnzbd with nzbdrone
Posted: April 21st, 2015, 1:47 pm
by markus101
We ended up pulling the retry logic from Sonarr because it didn't fit well with our goals and was causing more issues than it was solving. From the Sonarr perspective it still removes failed downloads though.
Re: sabnzbd with nzbdrone
Posted: April 21st, 2015, 3:25 pm
by MKANET
Thanks for the quick Response Markus. So can you think of any way to avoid this condition? I'm curious what other users do in this case. Would I have to completely disable retrying in Sonarr for this issue to be avoided? Any other ways to avoid the issue?
Re: sabnzbd with nzbdrone
Posted: April 21st, 2015, 4:53 pm
by markus101
Turning off Remove in Sonarr's Failed Download Settings would stop Sonarr from removing failed downloads (and freeing up the disk space), that would at least rule out Sonarr causing the error to occur, but won't solve any underlying issues as to why the ID is not found.
Re: sabnzbd with nzbdrone
Posted: April 21st, 2015, 5:16 pm
by MKANET
Thanks so much for the suggestion! I disabled that setting!
Re: sabnzbd with nzbdrone
Posted: April 29th, 2015, 11:36 am
by MKANET
After I disabled the remove setting in Sonarr, Sabnzbd STILL gives the errors on some downloads. However, at least SABNzbd doesn't completely stop when it gets those errors. Now that we know this issue isn't instigated by Sonarr (after successfully disabling Removal of failed downloads in Sonarr), how can I prevent this issue from happening in Sabnzbd?
Re: sabnzbd with nzbdrone
Posted: April 29th, 2015, 5:32 pm
by shypike
Try 0.8.0 as soon as it comes out.
Re: sabnzbd with nzbdrone
Posted: April 29th, 2015, 6:38 pm
by MKANET
Thanks! Will do.
Re: sabnzbd with nzbdrone
Posted: March 27th, 2016, 4:47 pm
by Klintrup
After upgrading from SABNZBD 0.7.20 to 1.0.0 I've started to see this message.
Though it probably doesn't matter I upgraded from the ubuntu native package to the sabnzbd+ provided package (
link)
When looking through sabnzbd logs from 5 days this issue only started occuring after the upgrade, I have a copy of logfiles with debug logging enabled from both sonarr and sabnzbd if this helps, just let me know where to send them.
Code: Select all
dpkg.log:2016-03-27 13:17:01 upgrade sabnzbdplus:all 0.7.20-1 1.0.0-0ubuntu1~jcfp1~wily
Code: Select all
# grep "Failed to remove nzo from postproc queue" *
sabnzbd.log.1:2016-03-27 17:38:09,404::ERROR::[postproc:126] Failed to remove nzo from postproc queue (id) SABnzbd_nzo_EWUilK
sabnzbd.log.2:2016-03-27 13:30:04,010::ERROR::[postproc:126] Failed to remove nzo from postproc queue (id) SABnzbd_nzo_zH6Tfk
sabnzbd.log.2:2016-03-27 13:32:34,317::ERROR::[postproc:126] Failed to remove nzo from postproc queue (id) SABnzbd_nzo_xe5I0X
sabnzbd.log.2:2016-03-27 13:39:00,928::ERROR::[postproc:126] Failed to remove nzo from postproc queue (id) SABnzbd_nzo_njofnC