Page 1 of 1
[0.7.5] Special switch won't go in ON state
Posted: November 6th, 2012, 4:28 pm
by blade-runner
For having SickBeard correctly handle Failed downloads i was told to enable special switch empty_postproc.
So i went in to the config and enabled this switch but nothing happened, rebooted SAB still this switch is set to off although it's selected.
Any suggestions?
Re: [0.7.5] Special switch won't go in ON state
Posted: November 6th, 2012, 4:32 pm
by shypike
You also need to disable Config->Switches, "Post-Process Only Verified Jobs".
Re: [0.7.5] Special switch won't go in ON state
Posted: November 6th, 2012, 4:55 pm
by blade-runner
Done, rebooted SAB but still it's "off"
http://imgbox.com/g/MOwA9d6aRf
Re: [0.7.5] Special switch won't go in ON state
Posted: November 6th, 2012, 5:44 pm
by shypike
Works fine when I test it.
Set logging to Debug on the Status page and try again.
Afterwards you should see the script being launched in the log.
Re: [0.7.5] Special switch won't go in ON state
Posted: November 6th, 2012, 6:20 pm
by blade-runner
Probably my systems i think.
On both my NAS and Desktop (which is still running 0.7.4) i can't get the switches set to ON in GUI, they are checked in GUI and marked in sabnzb.ini.
I also enabled debug but after activating the switches and restarting SABnzbd still no status change in GUI on both 0.7.4 and 0.7.5
I also don't know what to look for in the log to see it working.
But since it's enabled in sabnzbd.ini i think it should be working just can't trace it.
Re: [0.7.5] Special switch won't go in ON state
Posted: November 7th, 2012, 1:06 am
by shypike
Are scripts executed after succesful jobs?
Re: [0.7.5] Special switch won't go in ON state
Posted: November 7th, 2012, 4:29 am
by blade-runner
shypike wrote:Are scripts executed after succesful jobs?
Yes
Edit:
I did a clean install on a spare laptop and selected all Special options and saved config and rebooted SAB, all of them staid off
Re: [0.7.5] Special switch won't go in ON state
Posted: November 7th, 2012, 5:58 am
by shypike
Which browser are you using?
Looks more like there's something with the browser.
Re: [0.7.5] Special switch won't go in ON state
Posted: November 7th, 2012, 6:19 am
by blade-runner
shypike wrote:Which browser are you using?
Looks more like there's something with the browser.
Tested with Chrome and with IE8.
Will test with Firefox if you think it's a browser related issue.
Edit:
Tested in Chrome with IE-tab plugin, not working.
Chrome alone, not working
IE8, not working
Firefox, not working.
Edit2:
I think i'm experiencing a form of misinterpretation
I was hinted by another forum member that the values behind the available switch options are default settings instead of indication if it is set on or off.
If so this topic can be closed.
Re: [0.7.5] Special switch won't go in ON state
Posted: November 7th, 2012, 11:57 am
by shypike
blade-runner wrote:
I was hinted by another forum member that the values behind the available switch options are default settings instead of indication if it is set on or off.
Yes, it's a little bit confusing.
We list the default value, in case people forget what is was and want to restore to "factory settings".