Hi.. Installed SNZB version 0.8.0Beta5 everything was fine.. installed sickbeard (SB).. still fine.. then I connected my VPN tunnel.. to my surprise SB still works but SNZB breaks with the following errors:
File "/usr/share/sabnzbdplus/cherrypy/_cpwsgi.py", line 180, in trap
return func(*args, **kwargs)
File "/usr/share/sabnzbdplus/cherrypy/_cpwsgi.py", line 99, in __call__
return self.nextapp(environ, start_response)
File "/usr/share/sabnzbdplus/cherrypy/_cpwsgi.py", line 410, in tail
return self.response_class(environ, start_response, self.cpapp)
File "/usr/share/sabnzbdplus/cherrypy/_cpwsgi.py", line 234, in __init__
self.run()
File "/usr/share/sabnzbdplus/cherrypy/_cpwsgi.py", line 349, in run
request.run(meth, path, qs, rproto, headers, rfile)
File "/usr/share/sabnzbdplus/cherrypy/_cprequest.py", line 617, in run
raise cherrypy.TimeoutError()
TimeoutError
ERROR 24/01/2016 14:45 [24/Jan/2016:14:45:47] Traceback (most recent call last):
File "/usr/share/sabnzbdplus/cherrypy/_cpwsgi.py", line 180, in trap
return func(*args, **kwargs)
File "/usr/share/sabnzbdplus/cherrypy/_cpwsgi.py", line 99, in __call__
return self.nextapp(environ, start_response)
File "/usr/share/sabnzbdplus/cherrypy/_cpwsgi.py", line 410, in tail
return self.response_class(environ, start_response, self.cpapp)
File "/usr/share/sabnzbdplus/cherrypy/_cpwsgi.py", line 234, in __init__
self.run()
File "/usr/share/sabnzbdplus/cherrypy/_cpwsgi.py", line 349, in run
request.run(meth, path, qs, rproto, headers, rfile)
File "/usr/share/sabnzbdplus/cherrypy/_cprequest.py", line 617, in run
raise cherrypy.TimeoutError()
TimeoutError
ERROR 24/01/2016 14:45 [24/Jan/2016:14:45:47] Traceback (most recent call last):
File "/usr/share/sabnzbdplus/cherrypy/_cpwsgi.py", line 180, in trap
return func(*args, **kwargs)
File "/usr/share/sabnzbdplus/cherrypy/_cpwsgi.py", line 99, in __call__
return self.nextapp(environ, start_response)
File "/usr/share/sabnzbdplus/cherrypy/_cpwsgi.py", line 410, in tail
return self.response_class(environ, start_response, self.cpapp)
File "/usr/share/sabnzbdplus/cherrypy/_cpwsgi.py", line 234, in __init__
self.run()
File "/usr/share/sabnzbdplus/cherrypy/_cpwsgi.py", line 349, in run
request.run(meth, path, qs, rproto, headers, rfile)
File "/usr/share/sabnzbdplus/cherrypy/_cprequest.py", line 617, in run
raise cherrypy.TimeoutError()
TimeoutError
When I disconnect the VPN.. it comes back on again.. like nothing happened.. luckily this was a different VM.. my previous install works fine with the VPN.. (obviously with the older version of SNZB).. I've tried changing the ports, Ip address as well as the IP address it listens on no luck.. trying to change it to the loopback address doesn't work either
Ifconfig output prior to VPN..
eth0 Link encap:Ethernet HWaddr 00:0c:29:86:58:7c
inet addr:192.168.1.180 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fe86:587c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:49058 errors:0 dropped:0 overruns:0 frame:0
TX packets:45000 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:12199238 (12.1 MB) TX bytes:46513228 (46.5 MB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:24759 errors:0 dropped:0 overruns:0 frame:0
TX packets:24759 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:7581705 (7.5 MB) TX bytes:7581705 (7.5 MB)
Ifconfig output with vpn turned on:
eth0 Link encap:Ethernet HWaddr 00:0c:29:86:58:7c
inet addr:192.168.1.180 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fe86:587c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:51033 errors:0 dropped:0 overruns:0 frame:0
TX packets:47029 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:12587184 (12.5 MB) TX bytes:47079965 (47.0 MB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:25098 errors:0 dropped:0 overruns:0 frame:0
TX packets:25098 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:7840997 (7.8 MB) TX bytes:7840997 (7.8 MB)
tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
inet addr:172.20.20.66 P-t-P:172.20.20.66 Mask:255.255.252.0
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:20 errors:0 dropped:0 overruns:0 frame:0
TX packets:30 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:1942 (1.9 KB) TX bytes:3780 (3.7 KB)
netstat output is as follows:
Ubuntu01:~$ netstat -apn|grep 7272 | grep LISTEN
(Not all processes could be identified, non-owned process info
will not be shown, you would have to be root to see it all.)
tcp 0 0 0.0.0.0:7272 0.0.0.0:* LISTEN 2913/python
Is this a bug or have I missed something?
Thanks
VPN Breaks access to Web Page
Forum rules
Help us help you:
Help us help you:
- Tell us what system you run SABnzbd on.
- Adhere to the forum rules.
- Do you experience problems during downloading?
Check your connection in Status and Interface settings window.
Use Test Server in Config > Servers.
We will probably ask you to do a test using only basic settings. - Do you experience problems during repair or unpacking?
Enable +Debug logging in the Status and Interface settings window and share the relevant parts of the log here using [ code ] sections.
Re: VPN Breaks access to Web Page
To which IP addres do SABnzbd resp Sickbeard bind? So: localhost, or 127.0.0.1, or 0.0.0.0, or ... ?
Re: VPN Breaks access to Web Page
Hi.. thanks for the response.. I've changed the ip address several times.. started with local host and then assigned an local ip address.. each time I changed it.. I also changed it on the config page and the autostart file in /etc/default/sabnzbdplus
currently it's set to 0.0.0.0
currently it's set to 0.0.0.0
Re: VPN Breaks access to Web Page
Thoughts??? anyone??