Page 1 of 1
Too many connections to server xxx
Posted: May 10th, 2016, 12:28 pm
by blackkatt
Hi,
So I updated to the latest version yesterday 1.0.2 (Windows) and i read that false message "Too many connections to server" was fixed.
Now then funny thing is that I did not have a problem prior to updating to 1.0.2 and now I have
2016-05-10 04:11:26,023::ERROR::[downloader:579] Too many connections to server xxx
Re: Too many connections to server xxx
Posted: May 10th, 2016, 1:05 pm
by sander
You can reveal the real message by going to Servers, and then click on Test Server. Post that error message here.
Re: Too many connections to server xxx
Posted: May 10th, 2016, 1:08 pm
by blackkatt
What do you mean with real? I don't have too many connections to server.
Re: Too many connections to server xxx
Posted: May 10th, 2016, 1:26 pm
by sander
blackkatt wrote:What do you mean with real?
The real message sent by your newsserver
blackkatt wrote:I don't have too many connections to server.
... so some other newsserver response (the 'real' response) is triggering that SAB message.
But wait: I had a look at the source code:
Code: Select all
logging.debug('Server login problem: %s, %s', ecode, msg)
if ecode in ('502', '481', '400') and clues_too_many(msg):
# Too many connections: remove this thread and reduce thread-setting for server
# Plan to go back to the full number after a penalty timeout
if server.active:
server.errormsg = T('Too many connections to server %s') % display_msg
logging.error(T('Too many connections to server %s'), server.id)
So: set SABnzbd's logging to +Debug, re-download, and as soon you see the error message check your sabnzbd.log for a line with "Server login problem". Post the output here.
For example
Code: Select all
2016-05-10 20:23:35,650::DEBUG::[downloader:574] Server login problem: 482, 482 Too many connections for your user (nntpswitch)
and
Code: Select all
$ cat ~/.sabnzbd/logs/sabnzbd.log | grep -i -e "too many" -e "server login problem"
2016-05-10 20:37:16,561::DEBUG::[downloader:574] Server login problem: 400, 400 dreader37.news.xs4all.nl: Too many connections from your host (max 4) - [email protected]
2016-05-10 20:37:16,561::ERROR::[downloader:580] Too many connections to server newszilla6.xs4all.nl
Re: Too many connections to server xxx
Posted: May 10th, 2016, 1:31 pm
by blackkatt
Ok will do tomorrow
Re: Too many connections to server xxx
Posted: May 19th, 2016, 6:04 am
by thorrrr
HI
I have same issue if i test server i get Connection Successful
But when i open Sab i get
19/05/2016 11:54 Too many connections to server news.usenetserver.com
ERROR 19/05/2016 11:42 Too many connections to server news.usenetserver.com
ERROR 19/05/2016 11:42 Too many connections to server news.iad.usenetserver.com
ERROR 19/05/2016 11:42 Too many connections to server news.iad.usenetserver.com
ERROR 19/05/2016 11:42 Too many connections to server news.iad.usenetserver.com
ERROR 18/05/2016 20:56 Too many connections to server news.usenetserver.com
ERROR 18/05/2016 20:56 Too many connections to server news.iad.usenetserver.com
Re: Too many connections to server xxx
Posted: May 19th, 2016, 4:22 pm
by shypike
We're working on this.
Re: Too many connections to server xxx
Posted: June 13th, 2016, 4:13 am
by thorrrr
HI Shypike
Just upgraded to 1.0.3 [927ba3c] but still getting same
https://dl.dropboxusercontent.com/u/928 ... ection.jpgeven though this release says it is fixed????
Re: Too many connections to server xxx
Posted: June 13th, 2016, 4:36 am
by safihre
Stupid question: but why not reduce the number of connections by a few?
Re: Too many connections to server xxx
Posted: July 26th, 2016, 12:45 am
by blackkatt
safihre wrote:Stupid question: but why not reduce the number of connections by a few?
This is not a problem any more (I think) but the reason, at least for me. Not to reduce number of connection is ofc speed! I have mine set to 49 of 50. Anything less I lose speed.
Re: Too many connections to server xxx
Posted: September 10th, 2017, 6:11 am
by EvilFlanders
Hi guys,
Not sure I should create a new thread for a problem with version 2 or re-use that one.
I've been having this problem since version 2. No fix unfortunately in the next releases.
Happens randomly, whether I set my max connections to 100% of what I'm allowed or 70%.
Here is the +debug log:
2017-09-10 12:38:07,493::DEBUG::[downloader:628] Server login problem: 502, 502 Too many connections
2017-09-10 12:38:07,493::WARNING::[downloader:636] Too many connections to server sslreader.eweka.nl
2017-09-10 12:38:07,594::DEBUG::[downloader:847] Set planned server resume sslreader.eweka.nl in 10 mins
Is it another problem of ghost connections or that have not been released? I can see a problem when reconnecting:
2017-09-10 12:43:20,724::DEBUG::[decoder:118] Decoding part154of164.Y4YlSdDBUBIY$
[email protected]
2017-09-10 12:43:20,726::DEBUG::[decoder:118] Decoding part155of164.Y4YlSdDBUBIY$
[email protected]
2017-09-10 12:43:20,735::DEBUG::[decoder:118] Decoding part158of164.Y4YlSdDBUBIY$
[email protected]
2017-09-10 12:43:20,757::DEBUG::[decoder:118] Decoding part150of164.Y4YlSdDBUBIY$
[email protected]
2017-09-10 12:43:20,831::INFO::[downloader:487]
[email protected]: Initiating connection
2017-09-10 12:43:20,832::DEBUG::[downloader:117] sslreader.eweka.nl: Re-using address 81.171.92.233
2017-09-10 12:43:20,934::INFO::[newswrapper:122]
[email protected]: Connected using TLSv1 (AES128-SHA)
2017-09-10 12:43:20,964::DEBUG::[decoder:118] Decoding part159of164.Y4YlSdDBUBIY$
[email protected]
2017-09-10 12:43:20,977::DEBUG::[decoder:118] Decoding part164of164.Y4YlSdDBUBIY$
[email protected]
2017-09-10 12:43:20,991::DEBUG::[downloader:628] Server login problem: 502, 502 Too many connections
2017-09-10 12:43:20,991::WARNING::[downloader:636] Too many connections to server sslreader.eweka.nl
2017-09-10 12:43:21,093::DEBUG::[downloader:847] Set planned server resume sslreader.eweka.nl in 10 mins
2017-09-10 12:43:21,112::DEBUG::[decoder:118] Decoding part161of164.Y4YlSdDBUBIY$
[email protected]
2017-09-10 12:43:21,116::DEBUG::[decoder:118] Decoding part162of164.Y4YlSdDBUBIY$
[email protected]
2017-09-10 12:43:21,123::DEBUG::[decoder:118] Decoding part160of164.Y4YlSdDBUBIY$
[email protected]
2017-09-10 12:43:21,131::DEBUG::[decoder:118] Decoding part163of164.Y4YlSdDBUBIY$
[email protected]
2017-09-10 12:43:21,134::DEBUG::[decoder:118] Decoding
[email protected]
2017-09-10 12:43:15,194::DEBUG::[decoder:118] Decoding
[email protected]
2017-09-10 12:43:15,207::INFO::[newswrapper:122]
[email protected]: Connected using TLSv1 (AES128-SHA)
2017-09-10 12:43:15,209::DEBUG::[decoder:118] Decoding
[email protected]
2017-09-10 12:43:15,278::DEBUG::[downloader:628] Server login problem: 502, 502 Too many connections
2017-09-10 12:43:15,278::WARNING::[downloader:636] Too many connections to server sslreader.eweka.nl
2017-09-10 12:43:15,379::DEBUG::[downloader:847] Set planned server resume sslreader.eweka.nl in 10 mins
2017-09-10 12:43:15,397::DEBUG::[decoder:118] Decoding
[email protected]
2017-09-10 12:43:15,413::DEBUG::[decoder:118] Decoding
[email protected]
Re: Too many connections to server xxx
Posted: September 10th, 2017, 7:59 am
by safihre
Eweka probably has a longer time out. Go into Config Servers, click advanced and set timeout to 120s. Or maybe 150.
Re: Too many connections to server xxx
Posted: September 10th, 2017, 8:05 am
by EvilFlanders
OK thanks. It was already at 120s. I'll try with 150s.
I just realised that it could be on eweka's side. Maybe they're cheap for a reason.
Re: Too many connections to server xxx
Posted: September 10th, 2017, 8:59 am
by safihre
While it could be SABnzbd, I have looked into this part of the code in such detail and if it was making ghost-connections these forums would be overflowing with bug reports
Re: Too many connections to server xxx
Posted: September 10th, 2017, 8:59 am
by safihre
While it could be SABnzbd, I have looked into this part of the code in such detail and if it was making ghost-connections these forums would be overflowing with bug reports
