SABnzbd Forums

Code: Select all

sudo apt-get install python-dev python-pip
sudo -H pip install sabyenc --upgrade

Code: Select all

# pip install sabyenc --upgrade
Downloading/unpacking sabyenc
  Downloading sabyenc-3.0.2.tar.gz
  Running setup.py (path:/tmp/pip-build-Rjvgrc/sabyenc/setup.py) egg_info for package sabyenc

Installing collected packages: sabyenc
  Running setup.py install for sabyenc
    building 'sabyenc' extension
    arm-linux-gnueabi-gcc -pthread -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -fno-strict-aliasing -D_FORTIFY_SOURCE=2 -g -fstack-protector-strong -Wformat -Werror=format-security -fPIC -I/usr/include/python2.7 -c src/sabyenc.c -o build/temp.linux-armv7l-2.7/src/sabyenc.o -O2
    unable to execute 'arm-linux-gnueabi-gcc': No such file or directory
    error: command 'arm-linux-gnueabi-gcc' failed with exit status 1
    Complete output from command /usr/bin/python -c "import setuptools, tokenize;__file__='/tmp/pip-build-Rjvgrc/sabyenc/setup.py';exec(compile(getattr(tokenize, 'open', open)(__file__).read().replace('\r\n', '\n'), __file__, 'exec'))" install --record /tmp/pip-CewgX3-record/install-record.txt --single-version-externally-managed --compile:
    running install

running build

running build_ext

building 'sabyenc' extension

creating build

creating build/temp.linux-armv7l-2.7

creating build/temp.linux-armv7l-2.7/src

arm-linux-gnueabi-gcc -pthread -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -fno-strict-aliasing -D_FORTIFY_SOURCE=2 -g -fstack-protector-strong -Wformat -Werror=format-security -fPIC -I/usr/include/python2.7 -c src/sabyenc.c -o build/temp.linux-armv7l-2.7/src/sabyenc.o -O2

unable to execute 'arm-linux-gnueabi-gcc': No such file or directory

error: command 'arm-linux-gnueabi-gcc' failed with exit status 1

----------------------------------------
Cleaning up...
Command /usr/bin/python -c "import setuptools, tokenize;__file__='/tmp/pip-build-Rjvgrc/sabyenc/setup.py';exec(compile(getattr(tokenize, 'open', open)(__file__).read().replace('\r\n', '\n'), __file__, 'exec'))" install --record /tmp/pip-CewgX3-record/install-record.txt --single-version-externally-managed --compile failed with error code 1 in /tmp/pip-build-Rjvgrc/sabyenc
Storing debug log for failure in /root/.pip/pip.log

Code: Select all

apt-get install crossbuild-essential-armel
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:

The following packages have unmet dependencies:
 crossbuild-essential-armel : Depends: gcc-arm-linux-gnueabi (>= 4.9.1-1) but it is not going to be installed
                              Depends: g++-arm-linux-gnueabi (>= 4.9.1-1) but it is not going to be installed
E: Unable to correct problems, you have held broken packages.

Code: Select all

apt-get install gcc-arm-linux-gnueabi
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:

The following packages have unmet dependencies:
 gcc-arm-linux-gnueabi : Depends: gcc-4.9-arm-linux-gnueabi (>= 4.9.2-10) but it is not installable
E: Unable to correct problems, you have held broken packages.

Code: Select all

pi@raspberrypi:~ $ uname -a
Linux raspberrypi 4.4.50-v7+ #970 SMP Mon Feb 20 19:18:29 GMT 2017 armv7l GNU/Linux

Code: Select all

2017-07-09 20:43:36,251::WARNING::[sabnzbdplus:401] SABYenc module... NOT found! Expecting v3.0.2 - https://sabnzbd.org/sabyenc

Code: Select all

pi@raspberrypi:~ $ cat /etc/apt/sources.list
deb http://mirrordirector.raspbian.org/raspbian/ jessie main contrib non-free rpi
# Uncomment line below then 'apt-get update' to enable 'apt-get source'
#deb-src http://archive.raspbian.org/raspbian/ jessie main contrib non-free rpi
deb http://ppa.launchpad.net/jcfp/ppa/ubuntu trusty main
deb http://ppa.launchpad.net/jcfp/sab-addons/ubuntu trusty main

Code: Select all

pi@raspberrypi:~ $ sudo apt-get install python-sabyenc
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following NEW packages will be installed:
  python-sabyenc
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 7422 B of archives.
After this operation, 53,2 kB of additional disk space will be used.
Get:1 http://ppa.launchpad.net/jcfp/sab-addons/ubuntu/ trusty/main python-sabyenc armhf 3.0.2-0ubuntu1~jcfp1~trusty [7422 B]
Fetched 7422 B in 0s (86,7 kB/s)          
Selecting previously unselected package python-sabyenc.
(Reading database ... 36546 files and directories currently installed.)
Preparing to unpack .../python-sabyenc_3.0.2-0ubuntu1~jcfp1~trusty_armhf.deb ...
Unpacking python-sabyenc (3.0.2-0ubuntu1~jcfp1~trusty) ...
Setting up python-sabyenc (3.0.2-0ubuntu1~jcfp1~trusty) ...

Code: Select all

pi@raspberrypi:~ $ python -c "import sabyenc ; print sabyenc.__version__ "
3.0.2
pi@raspberrypi:~ $

Code: Select all

2017-07-09 20:53:36,487::INFO::[sabnzbdplus:393] SABYenc module (v3.0.2)... found!