Page 1 of 1
I was sticking to PLUSH webinterface as long as I could now when there is no option for plush I cant get around the erro
Posted: September 21st, 2021, 5:16 am
by loopdemack
I was sticking to the PLUSH webinterface as long as I could, and now when there is no option for plush, I cant get around the error, I updated to latest python 3.9. I use only https access, http is disabled.
[21/Sep/2021:11:57:37] ENGINE Error in HTTPServer.tick
Traceback (most recent call last):
File "/usr/lib/python3/dist-packages/cherrypy/wsgiserver/__init__.py", line 2021, in start
self.tick()
File "/usr/lib/python3/dist-packages/cherrypy/wsgiserver/__init__.py", line 2090, in tick
s, ssl_env = self.ssl_adapter.wrap(s)
File "/usr/lib/python3/dist-packages/cherrypy/wsgiserver/ssl_builtin.py", line 67, in wrap
server_side=True)
File "/usr/lib/python3.6/ssl.py", line 407, in wrap_socket
_context=self, _session=session)
File "/usr/lib/python3.6/ssl.py", line 817, in __init__
self.do_handshake()
File "/usr/lib/python3.6/ssl.py", line 1077, in do_handshake
self._sslobj.do_handshake()
File "/usr/lib/python3.6/ssl.py", line 689, in do_handshake
self._sslobj.do_handshake()
OSError: [Errno 0] Error
I updated to python 3.9
python --version
Python 2.7.17
python3 --version
Python 3.6.9
python3.9 --version
Python 3.9.7
Seems that even after python 3.9 update, sab is still using older Python 3.6. Is there a way to instruct sabnzbd to use Python 3.9 or is there a way to overcome this issue?
Re: I was sticking to PLUSH webinterface as long as I could now when there is no option for plush I cant get around the
Posted: September 21st, 2021, 5:24 am
by sander
I'm confused:
What does Plush have to do with error message you show, and with the Python version?
Re: I was sticking to PLUSH webinterface as long as I could now when there is no option for plush I cant get around the
Posted: September 21st, 2021, 5:34 am
by loopdemack
Plush is no longer option in sab, and with latest version Glitter webinterface is the only option, and I don't want permanent error. Seems I collected unintentional sabnzbd update and now I'm stuck with Glitter and this error.
After adding the alternate for python now I cant even start sabnzbd
# sudo update-alternatives --config python3
update-alternatives: error: no alternatives for python3
# sudo update-alternatives --install /usr/bin/python3 python3 /usr/bin/python3.6 1
update-alternatives: using /usr/bin/python3.6 to provide /usr/bin/python3 (python3) in auto mode
# sudo update-alternatives --install /usr/bin/python3 python3 /usr/bin/python3.9 2
update-alternatives: using /usr/bin/python3.9 to provide /usr/bin/python3 (python3) in auto mode
# sudo update-alternatives --config python3
There are 2 choices for the alternative python3 (providing /usr/bin/python3).
Selection Path Priority Status
------------------------------------------------------------
* 0 /usr/bin/python3.9 2 auto mode
1 /usr/bin/python3.6 1 manual mode
2 /usr/bin/python3.9 2 manual mode
Press <enter> to keep the current choice[*], or type selection number: 2
# sudo service sabnzbdplus restart
Job for sabnzbdplus.service failed because the control process exited with error code.
See "systemctl status sabnzbdplus.service" and "journalctl -xe" for details.
# sudo service sabnzbdplus stop
# sudo service sabnzbdplus start
Job for sabnzbdplus.service failed because the control process exited with error code.
See "systemctl status sabnzbdplus.service" and "journalctl -xe" for details.
# systemctl status sabnzbdplus.service
● sabnzbdplus.service - LSB: SABnzbd+ binary newsgrabber
Loaded: loaded (/etc/init.d/sabnzbdplus; generated)
Active: failed (Result: exit-code) since Tue 2021-09-21 12:23:59 CEST; 18s ago
Docs: man:systemd-sysv-generator(8)
Process: 9724 ExecStop=/etc/init.d/sabnzbdplus stop (code=exited, status=0/SUCCESS)
Process: 9804 ExecStart=/etc/init.d/sabnzbdplus start (code=exited, status=1/FAILURE)
sabnzbdplus[9804]: Traceback (most recent call last):
sabnzbdplus[9804]: File "/usr/bin/sabnzbdplus", line 44, in <module>
hq3 sabnzbdplus[9804]: import feedparser
sabnzbdplus[9804]: File "/usr/lib/python3/dist-packages/feedparser.py", line 93, in <module>
sabnzbdplus[9804]: _base64decode = getattr(base64, 'decodebytes', base64.decodestring)
sabnzbdplus[9804]: AttributeError: module 'base64' has no attribute 'decodestring'
sabnzbdplus[9804]: ...fail!
systemd[1]: sabnzbdplus.service: Control process exited, code=exited status=1
systemd[1]: sabnzbdplus.service: Failed with result 'exit-code'.
systemd[1]: Failed to start LSB: SABnzbd+ binary newsgrabber.
Re: I was sticking to PLUSH webinterface as long as I could now when there is no option for plush I cant get around the
Posted: September 21st, 2021, 5:49 am
by sander
I still don't understand what Plush has to with your python version nor your error message. Glitter does not have to do SSL errors.
* SABnzbd requires Python 3.6. No need for Python 3.9
* I can't help with and would advice against upgrading to Python 3.9 on Linux. I can't help with python problems if did a python upgrade and that is causing problems
* SABnzbd 3.4.0 only has Glitter
* you can instruct your Linux to install a specific version of SABnzbd. Google "ubuntu install specific version of package"
So ... what do you want?
Re: I was sticking to PLUSH webinterface as long as I could now when there is no option for plush I cant get around the
Posted: September 21st, 2021, 6:16 am
by loopdemack
Wait, Safihre gave advice in few threads that we install Python 3.9 to fix this error I posted in the first post, in which bugs were fixed and even said about adding PPA repository, now this sudden switch and its not anymore advice ? I added ppa:deadsnakes/ppa
Should I uninstall python3.9 python3.9-venv and python3.9-dev?
I don't want to see this ENGINE Error in HTTPServer.tick Traceback error in sab. I had this error before I installed python 3.9.
How to fix it?
Re: I was sticking to PLUSH webinterface as long as I could now when there is no option for plush I cant get around the
Posted: September 21st, 2021, 6:42 am
by loopdemack
Also I installed alternate paths for python I can switch paths with
sudo update-alternatives --config python3
1 /usr/bin/python3.6 1 manual mode
2 /usr/bin/python3.9 2 manual mode
I'm now in mode 1 and I can start sabnzbd but I still have error in webinterface?
ENGINE Error in HTTPServer.tick
Traceback (most recent call last):
Re: I was sticking to PLUSH webinterface as long as I could now when there is no option for plush I cant get around the
Posted: September 21st, 2021, 6:46 am
by sander
Safihre gave advice in few threads that we install Python 3.9 to fix this error I posted in the first post
Can you post the URL to that thread?
I don't want to see this ENGINE Error in HTTPServer.tick Traceback error in sab
Clear. Workaround: uncheck "Enable HTTPS" in SABnzbd. Also, see the warning at that option: "Modern web browsers and other clients will not accept self-signed certificates and will give a warning and/or won't connect at all."
In the meantime I did some work: I can reproduce on Ubuntu 18.04. See
https://github.com/sabnzbd/sabnzbd/issues/1950
Re: I was sticking to PLUSH webinterface as long as I could now when there is no option for plush I cant get around the
Posted: September 21st, 2021, 7:00 am
by loopdemack
I enabled https because I had 20000 http hack attempts and seems few successful, they just added some garbage nothing important, when I disabled http and enabled https it stopped. Its was an know issue from last year. I need webinterface on the internet its not used locally.
Re: I was sticking to PLUSH webinterface as long as I could now when there is no option for plush I cant get around the
Posted: September 21st, 2021, 8:29 am
by sander
You didn't answer my first question. Pity.
I don't think I can make you happy, so I'll leave it to this.
Re: I was sticking to PLUSH webinterface as long as I could now when there is no option for plush I cant get around the
Posted: September 21st, 2021, 8:54 am
by loopdemack
sander wrote: ↑September 21st, 2021, 8:29 am
You didn't answer my first question. Pity.
I don't think I can make you happy, so I'll leave it to this.
First question, you mean links to threads, I think it was several I also saw you in those threads.
I closed them let me check in the history.
Re: I was sticking to PLUSH webinterface as long as I could now when there is no option for plush I cant get around the
Posted: September 21st, 2021, 10:08 am
by loopdemack
It was about ancient CherryPy and that bugs were fixed in python 3.8 and 3.9.
I just cant find it again I will try even deeply to search again thread I mentioned, maybe it was on github.
I use letsencrypt SSL certificates but not for the domain but for the registered IP.
Re: I was sticking to PLUSH webinterface as long as I could now when there is no option for plush I cant get around the
Posted: September 21st, 2021, 2:48 pm
by loopdemack
safihre wrote: ↑December 4th, 2020, 3:06 pm
This is a different problem:
viewtopic.php?f=2&t=24900
It is a bug in Python which is fixed in the latest Python 3.8 and 3.9
I found one I will post when I find other two posts.
Re: I was sticking to PLUSH webinterface as long as I could now when there is no option for plush I cant get around the
Posted: September 22nd, 2021, 6:05 am
by loopdemack
Ok if there is no fix could in the next sab we get the option not to show this error, because every 5-10 seconds after I remove the error if I download something error is back.
Re: I was sticking to PLUSH webinterface as long as I could now when there is no option for plush I cant get around the
Posted: September 22nd, 2021, 10:58 am
by safihre
The error is fixed in Python 3.9, it's not a SABnzbd thing but a Python-problem.
We also don't choose which Python to use, that's what you do when running SABnzbd.