Gigabit limited at 60MBps - windows

[sua16]

My new gigabit fibre connection that I can max out on plenty of downloads in steam, chrome and other places will not surpass 60MBps on sab

Newhosting. 100 connections, speed drops if I use less. I'm aware of the overheads

Hardware is all more than adequate

System performance (Pystone) 395319
Download folder speed 392.9 MB/s
Complete folder speed 394.5 MB/s
Internet Bandwidth 107.21 MB/s

32gb ram
Ubiquiti Dream Machine router

I've followed every tip I can find online. I've no idea how to get to 100(+)MBps down in sab

[sander]

same as https://www.reddit.com/r/usenet/comment ... lf_speeds/ ?

[sua16]

Identically, results and username :*

I think I've narrowed my issue down to my provider. Leaptel, Australia

[sander]

Australia ... ok ... so long ping times to your newsservers? Can you check?

But if/as that's the cause, then I'm suprised SABnzbd reports the disk speed as limiting.


Example ping to example newsserver:

Code: Select all

PS C:\> ping news.eweka.nl

Pinging news.eweka.nl [81.171.92.233] with 32 bytes of data:
Reply from 81.171.92.233: bytes=32 time=9ms TTL=56
Reply from 81.171.92.233: bytes=32 time=6ms TTL=56
Reply from 81.171.92.233: bytes=32 time=8ms TTL=56
Reply from 81.171.92.233: bytes=32 time=6ms TTL=56

[sua16]

C:\Users\xxxx>ping news.newshosting

Pinging news.iad.newshosting [85.12.62.251] with 32 bytes of data:
Reply from 85.12.62.251: bytes=32 time=218ms TTL=42
Reply from 85.12.62.251: bytes=32 time=218ms TTL=42
Reply from 85.12.62.251: bytes=32 time=218ms TTL=42
Reply from 85.12.62.251: bytes=32 time=218ms TTL=42

Ping statistics for 85.12.62.251:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 218ms, Maximum = 218ms, Average = 218ms

I'm highly doubtful in the disk limit

[sander]

quite long ping times. I don't completely understand how long ping time can cause delays with multiple, parallel newsservers connection, but people from AU/NZ often report this.

1) how many newsservers have you defined?
2) how many sessions per server? If you raise the number to 45 (or 90, depending on provider), what's the effect on your NZB downloads?

[sua16]

https://forums.whirlpool.net.au/archive/9m014p55

This is the one place I've found of similar issue. Leaptel maxing at 75. While Aussie Broadband, our top provider, getting 110+. I'll likely switch tomorrow and try

Sorry I'm not super onto Usenet terms etc. Hopefully these are the right answers

1. Newhosting and I just signed up for a trial of eweka, but it was no different.
2. 100 with Newhosting, anything less and it slows my speeds. I've tried many different variations. Eweka had 30 and I tried different amounts also. Newhosting 100 was best

[sua16]

Switching had absolutely zero effect....Still sitting at 65...

[sua16]

https://imgur.com/a/bnX0ndn

Steam completely saturates the connection on the same drive, sustained. This is killing me

[sander]

You're double posting ... see https://www.reddit.com/r/usenet/comment ... t/lr7q1tr/

Your SABnzbd Wrench screen is shoing 1000 Mbps too.

I'm going to lock this topic