Page 1 of 2
Authentication missing, please enter username/password from Config->General ....
Posted: March 16th, 2010, 6:33 am
by nerpissad
Version: 0.5.0 Final
OS: OSX 10.6.2
Install-type: OSx .app
Skin: Plush
Are you using IPV6? no
Is the issue reproducible? yes
I have set up sabnzbd to execute a script when a specific category of downloads finishes (it updates the plex media center app).
however, since the new 0.5.0 version this message appears when the download has finished:
Access to this document requires a User ID
I read that it could relate to a permissions issue (I am running on OSX 10.6.2) and I have set the permissions to 777 in permissions for completed downloads in config ->folders.
this doesn't get rid of the message and more importantly doesn't execute the script.
anyone have any ideas on how to solve this?
on a sidenote, I also get occasional warnings that I should be enter a user name and password in my 3rd party program, but I can never figure out which program that could be?
I use the myNZB iphone app (with API key) and I have tried ploughing through the log file but it never says which program the message relates to..
it may also be important to note that I use nzbmatrix RSS feeds (also with API key).
any help is appreciated!
Re: Access to this document requires a User ID
Posted: March 16th, 2010, 6:48 am
by shypike
First the apikey of nzbmatrix and that of SABnzbd are not related.
It must be the myNZB phone app.
Some of these third-party apps deliberately cause incorrect logins
to find out how authentication works. These are logged as warning.
Release 0.5.0 suppresses warnings about the behavior of the more
popular apps, but not for myNZB.
The author of myNZB should fix this, because 0.5.0 now has an API
call to find out about authentication.
I have no clue about the"Access to this doc" message.
Where does it appear?
What happens if you run the script from a terminal prompt?
Re: Access to this document requires a User ID
Posted: March 16th, 2010, 7:45 am
by nerpissad
shypike wrote:
First the apikey of nzbmatrix and that of SABnzbd are not related.
It must be the myNZB phone app.
Some of these third-party apps deliberately cause incorrect logins
to find out how authentication works. These are logged as warning.
Release 0.5.0 suppresses warnings about the behavior of the more
popular apps, but not for myNZB.
The author of myNZB should fix this, because 0.5.0 now has an API
call to find out about authentication.
could this be the case even when I'm not using the myNZB app? I only use that occasionally, but the warning messages appear more frequently.
I just checked the settings in myNZB and I do have the API key entered in there as well.
this is what the warning looks like in the log:
2010-03-15 22:17:43,420::WARNING::[interface:232] Authentication missing, please enter username/password from Config->General into your 3rd party program:
shypike wrote:
I have no clue about the"Access to this doc" message.
Where does it appear?
What happens if you run the script from a terminal prompt?
it appears in the history overview:
I can execute the script from the terminal without issues. it's quite the simple script as well:
Code: Select all
#!/bin/sh
curl --get "http://192.168.1.200:3000/xbmcCmds/xbmcHttp?command=ExecBuiltIn¶meter=XBMC.updatelibrary(video)"
this was working fine in 0.4.12 by the way.
Re: Access to this document requires a User ID
Posted: March 16th, 2010, 9:31 am
by shypike
myNZB may very well try this at regular intervals.
Please complain to its author as well.
The error is coming from curl, because the website wants authentication.
Depending on how you start SABnzbd, the script may inherit
a different environment than it gets from a terminal prompt.
It's your job to make sure it gets the right one.
Add a "set" command to the script and look at the differences
between running it from the terminal and from SABnzbd.
Re: Access to this document requires a User ID
Posted: March 16th, 2010, 3:11 pm
by nerpissad
I've managed to get round one of the issues by changing the script to include a username and password in the URL like so:
Code: Select all
#!/bin/sh
curl --get "http://plex:[email protected]:3000/xbmcCmds/xbmcHttp?command=ExecBuiltIn¶meter=XBMC.updatelibrary(video)"
I now get a beautiful
Ok in the history overview. ;)
I haven't had the 'pleasure' of seeing the other warning message yet, even after playing around with myNZB. maybe the messages are related somehow.
Re: Access to this document requires a User ID
Posted: March 18th, 2010, 1:26 pm
by nerpissad
the problem has not magically solved itself unfortunately.
I have however noticed that the warning messages start appearing when I put an nzb in my watched folder.
my watched folder is a dropbox folder which is scanned every 20 seconds for new nzb's.
the warnings show up almost exactly every half hour from the moment SAB starts downloading and don't stop after downloading has finished:
2010-03-18 15:43:37,323
WARNING:
Authentication missing, please enter username/password from Config->General into your 3rd party program:
2010-03-18 16:13:35,711
WARNING:
Authentication missing, please enter username/password from Config->General into your 3rd party program:
2010-03-18 16:43:38,785
WARNING:
Authentication missing, please enter username/password from Config->General into your 3rd party program:
2010-03-18 17:13:39,507
WARNING:
Authentication missing, please enter username/password from Config->General into your 3rd party program:
obviously now I'm suspecting dropbox to be the culprit, but I can not be sure. the half hour interval is strange too. I can't find any settings in neither dropbox nor SAB that have an half hour interval of some sort.
is anyone using a similar set up with dropbox as a watched folder?
Re: Authentication missing, please enter username/password from Config->General ....
Posted: April 22nd, 2010, 6:01 am
by kitgerrits
There seems to be a 5-minute interval in mine:
2010-04-22 12:07:46,433 WARNING: Authentication missing, please enter username/password from Config->General into your 3rd party program:
2010-04-22 12:22:33,565 WARNING: Authentication missing, please enter username/password from Config->General into your 3rd party program:
2010-04-22 12:27:34,640 WARNING: Authentication missing, please enter username/password from Config->General into your 3rd party program:
2010-04-22 12:37:09,044 WARNING: Authentication missing, please enter username/password from Config->General into your 3rd party program:
I have already disabled nzbdstatus (and restarted firefox), but the warning keeps coming back.Q
I am running the directory watch, but I haven't dropped anything in there in a while...
Could the Plush skin be at fault?
Re: Authentication missing, please enter username/password from Config->General ....
Posted: April 22nd, 2010, 12:03 pm
by shypike
kitgerrits wrote:
Could the Plush skin be at fault?
Try another one.
Re: Authentication missing, please enter username/password from Config->General ....
Posted: April 22nd, 2010, 12:38 pm
by kitgerrits
I just switched to classic - darkblue (/m/) and the line appeared each time I opened the config page.
Then it stopped appearing... :-\
2010-04-22 19:28:40,747 WARNING: Authentication missing, please enter username/password from Config->General into your 3rd party program:
2010-04-22 19:28:46,023 WARNING: Authentication missing, please enter username/password from Config->General into your 3rd party program:
2010-04-22 19:29:00,084 WARNING: Authentication missing, please enter username/password from Config->General into your 3rd party program:
2010-04-22 19:29:20,044 WARNING: Authentication missing, please enter username/password from Config->General into your 3rd party program:
2010-04-22 19:29:22,884 WARNING: Authentication missing, please enter username/password from Config->General into your 3rd party program:
2010-04-22 19:29:25,867 WARNING: Authentication missing, please enter username/password from Config->General into your 3rd party program:
With smpl - blue, I get the line each time I open the Home page.
I only get the warning with Firefox, not Internet Explorer.
It happens when loading /sabnzbd/, not one of the sub-requests (css, queue, history, tapi)
Authentication missing - Got it!
Posted: April 22nd, 2010, 1:38 pm
by kitgerrits
I have found the culprit:
It's the CoolIris plugin in Firefox.
Disabling that will make the warnings go away.
Should I disable it or can you 'silently drop' the ones caused by that plug-in?
Re: Authentication missing, please enter username/password from Config->General ....
Posted: April 22nd, 2010, 2:13 pm
by shypike
Why does CoolIris try to communicate with SABnzbd?
We put the warning in for a reason, namely to warn you about
a failing third-party application or a potential security breach.
Re: Authentication missing, please enter username/password from Config->General ....
Posted: April 22nd, 2010, 2:43 pm
by kitgerrits
Interesting:
https://addons.mozilla.org/en-US/firefox/reviews/display/5579?page=3&show=20 wrote:I've detected spyware-like behavior on the Cooliris 1.11.6 add-on: After installing the add-on, Firefox makes unsolicited connections every time the browser gets closed (to at least the following addresses: 216.211.172.39, 87.248.218.80, 74.125.87.105) - even when Cooliris has not been used at all! (Just open Firefox and close it again to observe this behavior.)
I've solved the problem by removing the Cooliris add-on.
I have notified Cooliris of this behaviour and await their response ;-)
Re: Authentication missing, please enter username/password from Config->General ....
Posted: June 4th, 2010, 2:00 pm
by Nordmann
I've started to receive those warning messages too, wasn't aware that Cooliris (for Chromium) was the culprit.
Now the million dollar question. I'm not even running Sab on this computer so why the hell is Coloris doing accessing
MY Sabnzb server, on
MY PRIVATE network?
Kitgerrits, did you receive a reply from the mail you sent Coloris?
Re: Authentication missing, please enter username/password from Config->General ....
Posted: June 4th, 2010, 2:04 pm
by kitgerrits
They're ready to help, but by then I had simply disabled the add-on.
(I had just spent a few days debugging my Tomtom)
Hi there!
Under what conditions are you seeing these unsolicited requets? Which site are you visiting and to which addresses are these connections being made?
Cheers,
Jeff & the Cooliris Team
Re: Authentication missing, please enter username/password from Config->General ....
Posted: August 5th, 2010, 12:25 am
by kricker
Thank goodness I found this thread. I was having the same issue using Firefox. Disabled the Cooliris plugin and now the usernmae/password errors are gone!